Package Modelica.Thermal.FluidHeatFlow.Interfaces
Connectors and partial models

This package contains connectors and partial models:

FlowPort: basic definition of the connector.
FlowPort_a & FlowPort_b: same as FlowPort with different icons to differentiate direction of flow
package Partials (defining basic thermodynamic equations)

Extends from Modelica.Icons.InterfacesPackage (Icon for packages containing interfaces).

Name	Description
`FlowPort`	Connector flow port
`FlowPort_a`	Filled flow port (used upstream)
`FlowPort_b`	Hollow flow port (used downstream)
`Partials` …	Partial models

Connector Modelica.Thermal.FluidHeatFlow.Interfaces.FlowPort
Connector flow port

Basic definition of the connector.
Variables:

If ports with different media are connected, the simulation is asserted due to the check of parameter.

Same as FlowPort, but icon allows to differentiate direction of flow.

Same as FlowPort, but icon allows to differentiate direction of flow.

Generated 2018-12-12 12:14:33 EST by MapleSim.