GeneralCurrentToVoltageAdaptorSignal adaptor for an Electrical OnePort with voltage and derivative of voltage as outputs and current and derivative of current as inputs (especially useful for FMUs) 
This information is part of the Modelica Standard Library maintained by the Modelica Association.
Adaptor between an electrical oneport and a signal representation of the oneport. This component is used to provide a pure signal interface around an Electrical model and export this model in form of an input/output block, especially as FMU (Functional Mockup Unit). Examples of the usage of this adaptor are provided in Electrical.Analog.Examples.GenerationOfFMUs. This adaptor has current and derivative of current as inputs and voltage and derivative of voltage as output signals.
Note, the input signals must be consistent to each other (di=der(i)).
Note, the adaptor contains no ground. Bear in mind that separating physical components and connecting them via adaptor signals requires to place appropriate ground components to define electric potential within the subcircuits.
use_pder 
Value: true Type: Boolean Description: Use output for 1st derivative of potential 

use_pder2 
Value: false Type: Boolean Description: Use output for 2nd derivative of potential (only if 1st derivate is used, too) 
use_fder 
Value: true Type: Boolean Description: Use input for 1st derivative of flow 
use_fder2 
Value: false Type: Boolean Description: Use input for 2nd derivative of flow (only if 1st derivate is used, too) 
p 
Type: RealOutput Description: Output for potential 


pder 
Type: RealOutput Description: Optional output for der(potential) 

pder2 
Type: RealOutput Description: Optional output for der2(potential) 

f 
Type: RealInput Description: Input for flow 

fder 
Type: RealInput Description: Optional input for der(flow) 

fder2 
Type: RealInput Description: Optional input for der2(flow) 

pin_p 
Type: PositivePin 

pin_n 
Type: NegativePin 
Modelica.Electrical.Analog.Examples Example to demonstrate variants to generate FMUs (Functional Mockup Units) 

Modelica.Electrical.Analog.Examples Resonance circuits: example to demonstrate generation of FMUs (Functional Mockup Units) 
Modelica.Electrical.Analog.Examples.Utilities Input/output block of a direct capacitor model 

Modelica.Electrical.Analog.Examples.Utilities Input/output block of an inverse inductor model 

Modelica.Electrical.Analog.Examples.Utilities Input/output block of a conductance model 