DcdcInverter

DC-DC inverter

Diagram

This information is part of the Modelica Standard Library maintained by the Modelica Association.

This is a model of a DC-DC inverter. The level of detail of the DC-DC inverter may be chosen from ideal averaging or switching.

Reference voltage is limited to actual battery voltage.

Battery voltage and motor current are measured.

useIdealInverter	Value: true Type: Boolean Description: Use ideal averaging inverter, otherwise switching inverter
fS	Value: Type: Frequency (Hz) Description: Switching frequency
Td	Value: 0.5 / fS Type: Time (s) Description: Dead time
Tmf	Value: 2 / fS Type: Time (s) Description: Measurement filter time constant
VMax	Value: Type: Voltage (V) Description: Maximum Voltage
Ti	Value: 1e-6 Type: Time (s) Description: Time constant of integral power controller
RonT	Value: 1e-05 Type: Resistance (Ω) Description: Transistor closed resistance
GoffT	Value: 1e-05 Type: Conductance (S) Description: Transistor opened conductance
VkneeT	Value: 0 Type: Voltage (V) Description: Transistor threshold voltage
RonD	Value: 1e-05 Type: Resistance (Ω) Description: Diode closed resistance
GoffD	Value: 1e-05 Type: Conductance (S) Description: Diode opened conductance
VkneeD	Value: 0 Type: Voltage (V) Description: Diode threshold voltage

pDC	Default Value: vDC * iDC Type: Power (W) Description: DC power (from battery)
pMot	Default Value: vMot * iMot Type: Power (W) Description: Power to motor

pDC

Default Value: vDC * iDC

Type: Power (W)

Description: DC power (from battery)

pMot

Default Value: vMot * iMot

Type: Power (W)

Description: Power to motor

Modelica.Electrical.Machines.Examples.ControlledDCDrives.Utilities

Partial controlled DC PM drive with H-bridge from battery