DCEE_StartTest example: DC with electrical excitation starting with voltage ramp |
 |
Diagram
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
Test example: Electrically separate excited DC machine started with an armature voltage rampA voltage ramp is applied to the armature, causing the DC machine to start, and accelerating inertias.
At time tStep a load step is applied.
Simulate for 2 seconds and plot (versus time):
- dcee.ia: armature current
- dcee.wMechanical: motor's speed
- dcee.tauElectrical: motor's torque
- dcee.ie: excitation current
Parameters (8)
| Va |
Value: 100 Type: Voltage (V) Description: Actual armature voltage |
|---|---|
| tStart |
Value: 0.2 Type: Time (s) Description: Start of armature voltage ramp |
| tRamp |
Value: 0.8 Type: Time (s) Description: Armature voltage ramp |
| Ve |
Value: 100 Type: Voltage (V) Description: Actual excitation voltage |
| TLoad |
Value: 63.66 Type: Torque (N·m) Description: Nominal load torque |
| tStep |
Value: 1.5 Type: Time (s) Description: Time of load torque step |
| JLoad |
Value: 0.15 Type: Inertia (kg·m²) Description: Load's moment of inertia |
| dceeData |
Value: Type: DcElectricalExcitedData |
Components (9)
 |
dcee |
Type: DC_ElectricalExcited |
|---|---|---|
 |
ramp |
Type: Ramp |
 |
signalVoltage |
Type: SignalVoltage |
 |
ground |
Type: Ground |
 |
constantVoltage |
Type: ConstantVoltage |
|
groundExcitation |
Type: Ground |
 |
loadInertia |
Type: Inertia |
 |
loadTorqueStep |
Type: TorqueStep |
 |
dceeData |
Type: DcElectricalExcitedData |