This information is part of the Modelica Standard Library maintained by the Modelica Association.

Test example: Investigate influence of armature temperature on a DCPM motor
The motor starts at no-load speed, then a load step is applied.
Beginning with the load step, the armature temperature rises exponentially from 20 degC to 80 degC.
Simulate for 3 seconds and plot (versus time):

• dcpm.ia: armature current
• dcpm.wMechanical: motor's speed
• dcpm.tauElectrical: motor's torque
• thermalAmbientDCPM.Q_flow_a: motor's armature losses

Default machine parameters are used, but:

• The armature winding material is set to Copper.
• Armature reference temperature is set to 80 degC.
• Nominal armature temperature is set to 80 degC.

So the machine is at the beginning in cold condition, ending in warm condition (with the same armature resistance as the unmodified machine).

Va	Value: 100 Type: Voltage (V) Description: Actual armature voltage
Ve	Value: 100 Type: Voltage (V) Description: Actual excitation voltage
w0	Value: Modelica.SIunits.Conversions.from_rpm(1500) Type: AngularVelocity (rad/s) Description: No-load speed
TLoad	Value: 63.66 Type: Torque (N·m) Description: Nominal load torque
JLoad	Value: 0.15 Type: Inertia (kg·m²) Description: Load's moment of inertia
dcpmData	Value: Type: DcPermanentMagnetData