Enable1mPartial model providing enable parameter and optional enable input for m firing signals |
 |
Diagram
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This partial model provides the enabling logic for m firing signal.
Parameters (2)
| useConstantEnable |
Value: true Type: Boolean Description: true = disabled boolean input, use constantEnable |
|---|---|
| constantEnable |
Value: true Type: Boolean Description: Constant enabling of firing signals |
Connectors (2)
 |
fire_p |
Type: BooleanInput[m] Description: Firing signals of positive potential transistors |
|---|---|---|
|
enable |
Type: BooleanInput Description: Enables fire and notFire |
Components (2)
 |
andCondition_p |
Type: And[m] Description: And condition for m positive firing signals |
|---|---|---|
 |
enableLogic |
Type: EnableLogic Description: Enabling logic |
Extended by (3)
 |
Modelica.Electrical.PowerConverters.Interfaces.Enable Partial model providing enable parameter and optional enable input for 2*m firing signals |
 |
Modelica.Electrical.PowerConverters.ACDC 2*m pulse half controlled rectifier bridge |
 |
Modelica.Electrical.PowerConverters.ACDC m pulse thyristor rectifier with center tap |