Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

For the unsymmetrical load (resistor, capacitor and inductor) the parameters inductance L and capacitance C are chosen such way that the magnitudes of the three phase currents (see currentSensor12, currentSensor23, currentSensor31) are equal.

P.Vaske, Berechnung von Drehstromschaltungen (German, Calculation of polyphase circuits), Teubner 1973, page 43, example 23

Parameters (5)

V_LL	Value: 100 Type: Voltage (V) Description: Source voltage line-to-line
f	Value: 50 Type: Frequency (Hz) Description: Source frequency
R	Value: 10 Type: Resistance (Ω) Description: Load resistance
L	Value: R * sqrt(3) / (2 * Modelica.Constants.pi * f) Type: Inductance (H) Description: Load inductance
C	Value: 1 / (R * sqrt(3)) / (2 * Modelica.Constants.pi * f) Type: Capacitance (F) Description: Load capacitance

i	Default Value: {resistor.i, inductor.i, capacitor.i} Type: ComplexCurrent[m] Description: Phase currents

Components (16)

	i	Type: ComplexCurrent[m] Description: Phase currents
	voltageSource	Type: VoltageSource
	star	Type: Star
	ground	Type: Ground
	plugToPin_p1	Type: PlugToPin_p
	plugToPin_p2	Type: PlugToPin_p
	plugToPin_p3	Type: PlugToPin_p
	powerSensor	Type: PowerSensor
	currentSensor	Type: CurrentSensor
	resistor	Type: Resistor
	capacitor	Type: Capacitor
	inductor	Type: Inductor
	currentSensor12	Type: CurrentSensor
	currentSensor23	Type: CurrentSensor
	currentSensor31	Type: CurrentSensor
	complexToPolar	Type: ComplexToPolar[m]

BalancingDelta

Diagram

Information

Parameters (5)

Outputs (1)

Components (16)