InductorSingle phase linear inductor |
 |
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
The linear inductor connects the voltage v with the
current i by v = j*ω*L*i.
The Inductance L is allowed to be positive, zero, or negative.
See also
Resistor, Conductor, Capacitor, Impedance, Admittance, Variable resistor, Variable conductor, Variable capacitor, Variable inductor, Variable impedance, Variable admittance
Parameters (1)
| L |
Value: Type: Inductance (H) Description: Inductance |
|---|
Connectors (2)
 |
pin_p |
Type: PositivePin Description: Positive quasi-static single-phase pin |
|---|---|---|
 |
pin_n |
Type: NegativePin Description: Negative quasi-static single-phase pin |
Components (2)
 |
v |
Type: ComplexVoltage Description: Complex voltage |
|---|---|---|
 |
i |
Type: ComplexCurrent Description: Complex current |
Used in Examples (6)
 |
Modelica.Electrical.QuasiStationary.SinglePhase.Examples Series circuit with Bode analysis |
 |
Modelica.Electrical.QuasiStationary.SinglePhase.Examples Series resonance circuit |
 |
Modelica.Electrical.QuasiStationary.SinglePhase.Examples Parallel resonance circuit |
 |
Modelica.Electrical.QuasiStationary.MultiPhase.Examples Balancing an unsymmetrical star-connected load |
 |
Modelica.Electrical.QuasiStationary.MultiPhase.Examples Balancing an unsymmetrical delta-connected load |
 |
Modelica.Electrical.QuasiStationary.MultiPhase.Examples Unsymmetrical threephase load |
Used in Components (1)
 |
Modelica.Electrical.QuasiStationary.MultiPhase.Basic Multiphase linear inductor |