Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

For the unsymmetrical load (resistor, capacitor and inductor) the parameters inductance L and capacitance C are chosen such way that the neutral current (see currentSensor0) is zero.

P.Vaske, Berechnung von Drehstromschaltungen (German, Calculation of polyphase circuits), Teubner 1973, page 42, example 18

Parameters (5)

V	Value: 100 Type: Voltage (V) Description: Source Voltage
f	Value: 50 Type: Frequency (Hz) Description: Source frequency
R	Value: 10 Type: Resistance (Ω) Description: Load resistance
L	Value: R * sqrt(3) / (2 * Modelica.Constants.pi * f) Type: Inductance (H) Description: Load inductance
C	Value: 1 / (R * sqrt(3)) / (2 * Modelica.Constants.pi * f) Type: Capacitance (F) Description: Load capacitance

i	Default Value: {resistor.i, inductor.i, capacitor.i} Type: ComplexCurrent[m] Description: Phase currents

Components (18)

	i	Type: ComplexCurrent[m] Description: Phase currents
	voltageSource	Type: VoltageSource
	star	Type: Star
	ground	Type: Ground
	plugToPin_p1	Type: PlugToPin_p
	plugToPin_p2	Type: PlugToPin_p
	plugToPin_p3	Type: PlugToPin_p
	powerSensor	Type: PowerSensor
	currentSensor	Type: CurrentSensor
	resistor	Type: Resistor
	capacitor	Type: Capacitor
	inductor	Type: Inductor
	star2	Type: Star
	plugToPin_n1	Type: PlugToPin_n
	plugToPin_n2	Type: PlugToPin_n
	plugToPin_n3	Type: PlugToPin_n
	currentSensor0	Type: CurrentSensor
	complexToPolar	Type: ComplexToPolar[m]

BalancingStar

Diagram

Information

Parameters (5)

Outputs (1)

Components (18)