Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

The positive pin is based on Pin. Additionally the reference angle is specified in the connector. The time derivative of the reference angle is the actual angular velocity of the quasi stationary voltage and current. The symbol is also designed such way to look different than the negative pin.

	v	Type: ComplexElectricPotential Description: Complex potential at the quasi-static single-phase pin
	i	Type: ComplexCurrent Description: Complex current flowing into the quasi-static single-phase pin
	reference	Type: Reference Description: Reference

Used in Components (12)

	Ground Modelica.Electrical.QuasiStationary.SinglePhase.Basic Electrical ground
	IdealCommutingSwitch Modelica.Electrical.QuasiStationary.SinglePhase.Ideal Ideal commuting switch
	IdealIntermediateSwitch Modelica.Electrical.QuasiStationary.SinglePhase.Ideal Ideal intermediate switch
	IdealTransformer Modelica.Electrical.QuasiStationary.SinglePhase.Ideal Ideal transformer
	PowerSensor Modelica.Electrical.QuasiStationary.SinglePhase.Sensors Power sensor
	MultiSensor Modelica.Electrical.QuasiStationary.SinglePhase.Sensors Sensor to measure current, voltage and power
	TwoPin Modelica.Electrical.QuasiStationary.SinglePhase.Interfaces Two pins
	AbsoluteSensor Modelica.Electrical.QuasiStationary.SinglePhase.Interfaces Partial potential sensor
	IdealACDCConverter Modelica.Electrical.QuasiStationary.SinglePhase.Utilities Ideal AC DC converter
	PlugToPin_p Modelica.Electrical.QuasiStationary.MultiPhase.Basic Connect one (positive) pin
	PlugToPins_p Modelica.Electrical.QuasiStationary.MultiPhase.Basic Connect all (positive) pins
	ElectroMagneticConverter Modelica.Magnetic.QuasiStatic.FluxTubes.Basic Electro-magnetic energy conversion

PositivePin

Information

See also

Components (3)

Used in Components (12)