IdealACDCConverterIdeal AC DC converter 
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This is an ideal AC DC converter, based on a power balance between QS circuit and DC side. The parameter conversionFactor defines the ratio between averaged DC voltage and QS rms voltage. Furthermore, reactive power at the QS side is set to 0.
Of course no voltage or current ripple is present, neither at the QS side nor at the DC side. At the QS side, only base harmonics of voltage and current are taken into account. At the DC side, only the mean of voltage and current are taken into account.
conversionFactor 
Value: Type: Real Description: Ratio of DC voltage / QS rms voltage 

pin_pQS 
Type: PositivePin 


pin_nQS 
Type: NegativePin 

pin_pDC 
Type: PositivePin 

pin_nDC 
Type: NegativePin 
vQS 
Type: ComplexVoltage Description: AC QS voltage 


iQS 
Type: ComplexCurrent Description: AC QS current 

sQS 
Type: ComplexPower Description: AC QS apparent power 
Modelica.Electrical.QuasiStationary.SinglePhase.Examples Rectifier example 