MultiSensorSensor to measure current, voltage and power 
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This multi sensor measures current, voltage and instantaneous electrical power of a singlephase system and has a separated voltage and current path. The pins of the voltage path are pv and nv, the pins of the current path are pc and nc. The internal resistance of the current path is zero, the internal resistance of the voltage path is infinite.
ReferenceSensor, FrequencySensor, PotentialSensor, VoltageSensor, CurrentSensor, PowerSensor,
abs_i 
Default Value: 'abs'(i) Type: Current (A) Description: Absolute of complex current 

arg_i 
Default Value: arg(i) Type: Angle (rad) Description: Argument of complex current 
abs_v 
Default Value: 'abs'(v) Type: Voltage (V) Description: Absolute of complex voltage 
arg_v 
Default Value: arg(v) Type: Angle (rad) Description: Argument of complex voltage 
abs_apparentPower 
Default Value: 'abs'(apparentPower) Type: ApparentPower (V·A) Description: Absolute of complex apparent power 
arg_apparentPower 
Default Value: arg(apparentPower) Type: Angle (rad) Description: Argument of complex apparent power 
pc 
Type: PositivePin Description: Positive pin, current path 


nc 
Type: NegativePin Description: Negative pin, current path 

pv 
Type: PositivePin Description: Positive pin, voltage path 

nv 
Type: NegativePin Description: Negative pin, voltage path 

i 
Type: ComplexOutput Description: Current as complex output signal 

v 
Type: ComplexOutput Description: Voltage as complex output signal 

apparentPower 
Type: ComplexOutput Description: Instantaneous apparent power as complex output signal 