Ground

Ground node

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

Ground of an electrical circuit. The potential at the ground node is zero. Every electrical circuit has to contain at least one ground object.

SPICE does not have an element for the ground node (mass). In SPICE netlists the ground is specified by the node number 0. This Modelica SPICE library demands to describe the ground node by this ground element.

Connectors (1)

p

Type: Pin

Description: Ground pin

Used in Examples (14)

	Inverter Modelica.Electrical.Spice3.Examples Simple inverter circuit
	InvertersApartRecord Modelica.Electrical.Spice3.Examples Two inverters where transistor models use different modelcard instances
	InvertersExtendedModel Modelica.Electrical.Spice3.Examples Two inverters with MOS models defined by inheritance
	FourInverters Modelica.Electrical.Spice3.Examples Four inverters with MOSFET level 1, using private record as model card
	Nand Modelica.Electrical.Spice3.Examples MOS Nand gate circuit
	Nor Modelica.Electrical.Spice3.Examples MOS NOR gate circuit
	Graetz Modelica.Electrical.Spice3.Examples Graetz rectifier circuit
	Oscillator Modelica.Electrical.Spice3.Examples Oscillator circuit
	CoupledInductors Modelica.Electrical.Spice3.Examples
	CascodeCircuit Modelica.Electrical.Spice3.Examples
	Spice3BenchmarkDifferentialPair Modelica.Electrical.Spice3.Examples Simple differential pair
	Spice3BenchmarkMosfetCharacterization Modelica.Electrical.Spice3.Examples Mos output characteristics
	Spice3BenchmarkRtlInverter Modelica.Electrical.Spice3.Examples Simple RTL inverter
	Spice3BenchmarkFourBitBinaryAdder Modelica.Electrical.Spice3.Examples ADDER - 4 BIT ALL-NAND-GATE BINARY ADDER

Used in Components (1)

Modelica.Electrical.Spice3.Examples.Spice3BenchmarkFourBitBinaryAdder

.SUBCKT NAND 1 2 3 4