This information is part of the Modelica Standard Library maintained by the Modelica Association.

At start time tStart voltages are supplied to the multi phase asynchronous induction machines with squirrel cage. The machines starts from standstill, accelerating inertias against load torque quadratic dependent on speed, finally reaching nominal speed. Two equivalent machines with different numbers of phases are compared and their equal behavior is demonstrated.

Simulate for 1.5 seconds and plot (versus time):

• aimcM|M3.tauElectrical: machine torque
• aimsM/M3.wMechanical: machine speed
• feedback.y: zero since difference of three phase current phasor and scaled multi phase current phasor are equal

VsNominal	Value: 100 Type: Voltage (V) Description: Nominal RMS voltage per phase
fNominal	Value: aimcData.fsNominal Type: Frequency (Hz) Description: Nominal frequency
tOn	Value: 0.1 Type: Time (s) Description: Start time of machine
T_Load	Value: 161.4 Type: Torque (N·m) Description: Nominal load torque
w_Load	Value: 1440.45 * 2 * Modelica.Constants.pi / 60 Type: AngularVelocity (rad/s) Description: Nominal load speed
J_Load	Value: 0.29 Type: Inertia (kg·m²) Description: Load inertia
p	Value: 2 Type: Integer Description: Number of pole pairs
aimcData	Value: Type: AIM_SquirrelCageData