AIMC_InitializeSteady-state initialization of asynchronous induction machine with squirrel cage |
 |
Diagram
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
The asynchronous induction machine with squirrel cage is initialized in steady-state at no-load; at time tStart a load torque step is applied.
Simulate for 1.5 seconds and plot (versus time):
- currentQuasiRMSSensor.I: stator current RMS
- aimc.wMechanical: motor's speed
- aimc.tauElectrical: motor's torque
Default machine parameters are used.
Parameters (8)
| VNominal |
Value: 100 Type: Voltage (V) Description: Nominal RMS voltage per phase |
|---|---|
| fNominal |
Value: aimcData.fsNominal Type: Frequency (Hz) Description: Nominal frequency |
| wSync |
Value: 2 * pi * fNominal / aimc.p Type: AngularVelocity (rad/s) |
| tStart |
Value: 0.5 Type: Time (s) Description: Start time |
| TLoad |
Value: 161.4 Type: Torque (N·m) Description: Nominal load torque |
| wLoad |
Value: 1440.45 * 2 * Modelica.Constants.pi / 60 Type: AngularVelocity (rad/s) Description: Nominal load speed |
| JLoad |
Value: 0.29 Type: Inertia (kg·m²) Description: Load's moment of inertia |
| aimcData |
Value: Type: AIM_SquirrelCageData |
Components (9)
 |
aimc |
Type: AIM_SquirrelCage |
|---|---|---|
 |
currentQuasiRMSSensor |
Type: CurrentQuasiRMSSensor |
 |
sineVoltage |
Type: SineVoltage |
 |
star |
Type: Star |
 |
ground |
Type: Ground |
 |
loadInertia |
Type: Inertia |
 |
torqueStep |
Type: TorqueStep |
 |
terminalBox |
Type: TerminalBox |
 |
aimcData |
Type: AIM_SquirrelCageData |