IMS_CharacteristicsCharacteristic curves of induction machine with slip rings |
 |
Diagram
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This examples allows the investigation of characteristic curves of quasi static multi phase induction machines with slip ring rotor as a function of rotor speed.
Simulate for 1 second and plot (versus imsQS.wMechanical or perUnitSpeed):
currentSensorQS.abs_i[1]: (equivalent) RMS stator currentimsQS.tauElectrical: machine torqueimscQS.powerBalance.powerStator: stator powerimsQS.powerBalance.powerMechanical: mechanical power
Default machine parameters are used. The rotor resistance may be varied to demonstrate the impact on the characteristic curves
Parameters (6)
| VsNominal |
Value: 100 Type: Voltage (V) Description: Nominal RMS voltage per phase |
|---|---|
| fNominal |
Value: imsData.fsNominal Type: Frequency (Hz) Description: Nominal frequency |
| Rr |
Value: 0.16 / imsData.turnsRatio ^ 2 Type: Resistance (Ω) Description: Starting resistance |
| p |
Value: imsData.p Type: Integer Description: Number of pole pairs |
| w_Load |
Value: Modelica.SIunits.Conversions.from_rpm(1440.45) Type: AngularVelocity (rad/s) Description: Nominal load speed |
| imsData |
Value: Type: AIM_SlipRingData Description: Machine data |
Outputs (1)
| Iqs |
Default Value: iSensorQS.I Type: Current (A) Description: QS RMS current |
|---|
Components (15)
 |
terminalBoxQS |
Type: MultiTerminalBox |
|---|---|---|
 |
imsQS |
Type: IM_SlipRing |
 |
imsData |
Type: AIM_SlipRingData Description: Machine data |
 |
vSourceQS |
Type: VoltageSource |
 |
starQS |
Type: Star |
 |
groundQS |
Type: Ground |
 |
pSensorQS |
Type: PowerSensor |
 |
iSensorQS |
Type: CurrentQuasiRMSSensor |
|
starMachineQS |
Type: Star |
|
groundMachineQS |
Type: Ground |
 |
speed |
Type: Speed |
 |
ramp |
Type: Ramp |
|
groundRotorQS |
Type: Ground |
|
starRotorQS |
Type: Star |
 |
resistor |
Type: Resistor |