PartialCompliant

Partial model for the compliant connection of two rotational 1-dim. shaft flanges

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

This is a 1-dim. rotational component with a compliant connection of two rotational 1-dim. flanges where inertial effects between the two flanges are neglected. The basic assumption is that the cut-torques of the two flanges sum-up to zero, i.e., they have the same absolute value but opposite sign: flange_a.tau + flange_b.tau = 0. This base class is used to built up force elements such as springs, dampers, friction.

Connectors (2)

flange_a

Type: Flange_a

Description: Left flange of compliant 1-dim. rotational component

flange_b

Type: Flange_b

Description: Right flange of compliant 1-dim. rotational component

Extended by (2)

Spring

Modelica.Mechanics.Rotational.Components

Linear 1D rotational spring

SpringDamperNoRelativeStates

Modelica.Mechanics.Rotational.Examples.Utilities

Linear 1D rotational spring and damper in parallel (phi and w are not used as states)