Flange_a

One-dimensional rotational flange of a shaft (filled circle icon)

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

This is a connector for 1-dim. rotational mechanical systems and models which represents a mechanical flange of a shaft. The following variables are defined in this connector:

phi: Absolute rotation angle of the shaft flange in [rad].
tau: Cut-torque in the shaft flange in [Nm].

There is a second connector for flanges: Flange_b. The connectors Flange_a and Flange_b are completely identical. There is only a difference in the icons, in order to easier identify a flange variable in a diagram. For a discussion on the actual direction of the cut-torque tau and of the rotation angle, see section Sign Conventions in the user's guide of Rotational.

If needed, the absolute angular velocity w and the absolute angular acceleration a of the flange can be determined by differentiation of the flange angle phi:

w = der(phi);
a = der(w);

Used in Components (36)

PartialAirGap

Modelica.Electrical.Machines.BasicMachines.Components

Partial airgap model

PartialAirGapDC

Modelica.Electrical.Machines.BasicMachines.Components

Partial airgap model of a DC machine

MechanicalPowerSensor

Modelica.Electrical.Machines.Sensors

Mechanical power = torque x speed

RotorDisplacementAngle

Modelica.Electrical.Machines.Sensors

Rotor lagging angle

PartialBasicMachine

Modelica.Electrical.Machines.Interfaces

Partial model for all machines

FlangeSupport

Modelica.Electrical.Machines.Interfaces

Shaft and support

RotorSaliencyAirGap

Modelica.Magnetic.FundamentalWave.BasicMachines.Components

Air gap model with rotor saliency

PartialBasicInductionMachine

Modelica.Magnetic.FundamentalWave.Interfaces

Partial model for induction machine

RotorSaliencyAirGap

Modelica.Magnetic.QuasiStatic.FundamentalWave.BasicMachines.Components

Air gap model with rotor saliency

PartialBasicMachine

Modelica.Magnetic.QuasiStatic.FundamentalWave.BasicMachines.BaseClasses

Partial model for quasi static multi phase machines

RotorDisplacementAngle

Modelica.Magnetic.QuasiStatic.FundamentalWave.Sensors

Rotor lagging angle

MechanicalStructure

Modelica.Mechanics.MultiBody.Examples.Systems.RobotR3.Components

Model of the mechanical part of the r3 robot (without animation)

Revolute

Modelica.Mechanics.MultiBody.Joints

Revolute joint (1 rotational degree-of-freedom, 2 potential states, optional axis flange)

RollingWheelSet

Modelica.Mechanics.MultiBody.Joints

Joint (no mass, no inertia) that describes an ideal rolling wheel set (two ideal rolling wheels connected together by an axis)

JointUSR

Modelica.Mechanics.MultiBody.Joints.Assemblies

Universal - spherical - revolute joint aggregation (no constraints, no potential states)

JointSSR

Modelica.Mechanics.MultiBody.Joints.Assemblies

Spherical - spherical - revolute joint aggregation with mass (no constraints, no potential states)

JointRRR

Modelica.Mechanics.MultiBody.Joints.Assemblies

Planar revolute - revolute - revolute joint aggregation (no constraints, no potential states)

RevoluteWithLengthConstraint

Modelica.Mechanics.MultiBody.Joints.Internal

Revolute joint where the rotation angle is computed from a length constraint (1 degree-of-freedom, no potential state)

Rotor1D

Modelica.Mechanics.MultiBody.Parts

1D inertia attachable on 3-dim. bodies (3D dynamic effects are taken into account if world.driveTrainMechanics3D=true)

RotorWith3DEffects

Modelica.Mechanics.MultiBody.Parts.Rotor1D

1D inertia attachable on 3-dim. bodies (3D dynamic effects are taken into account)

RollingWheelSet

Modelica.Mechanics.MultiBody.Parts

Ideal rolling wheel set consisting of two ideal rolling wheels connected together by an axis

IdealPlanetary

Modelica.Mechanics.Rotational.Components

Ideal planetary gear box

TorqueToAngleAdaptor

Modelica.Mechanics.Rotational.Components

Signal adaptor for a Rotational flange with angle, speed, and acceleration as outputs and torque as input (especially useful for FMUs)

GeneralTorqueToAngleAdaptor

Modelica.Mechanics.Rotational.Components

Signal adaptor for a rotational flange with angle, speed, and acceleration as outputs and torque as input (especially useful for FMUs)

InternalSupport

Modelica.Mechanics.Rotational.Interfaces

Adapter model to utilize conditional support connector

PartialTwoFlanges

Modelica.Mechanics.Rotational.Interfaces

Partial model for a component with two rotational 1-dim. shaft flanges

PartialTwoFlangesAndSupport

Modelica.Mechanics.Rotational.Interfaces

Partial model for a component with two rotational 1-dim. shaft flanges and a support used for graphical modeling, i.e., the model is build up by drag-and-drop from elementary components

PartialCompliant

Modelica.Mechanics.Rotational.Interfaces

Partial model for the compliant connection of two rotational 1-dim. shaft flanges

PartialCompliantWithRelativeStates

Modelica.Mechanics.Rotational.Interfaces

Partial model for the compliant connection of two rotational 1-dim. shaft flanges where the relative angle and speed are used as preferred states

PartialElementaryTwoFlangesAndSupport

Modelica.Mechanics.Rotational.Interfaces

Obsolete partial model. Use PartialElementaryTwoFlangesAndSupport2.

PartialElementaryTwoFlangesAndSupport2

Modelica.Mechanics.Rotational.Interfaces

Partial model for a component with two rotational 1-dim. shaft flanges and a support used for textual modeling, i.e., for elementary models

PartialElementaryRotationalToTranslational

Modelica.Mechanics.Rotational.Interfaces

Partial model to transform rotational into translational motion

PartialAbsoluteSensor

Modelica.Mechanics.Rotational.Interfaces

Partial model to measure a single absolute flange variable

PartialRelativeSensor

Modelica.Mechanics.Rotational.Interfaces

Partial model to measure a single relative variable between two flanges

Pump

Modelica.Fluid.Machines

Centrifugal pump with mechanical connector for the shaft

IdealPump

Modelica.Thermal.FluidHeatFlow.Sources

Model of an ideal pump