PartialRelativeSensor

Partial model to measure a single relative variable between two flanges

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

This is a partial model for 1-dim. rotational components with two rigidly connected flanges in order to measure relative kinematic quantities between the two flanges or the cut-torque in the flange and to provide the measured signal as output signal for further processing with the blocks of package Modelica.Blocks.

Connectors (2)

flange_a

Type: Flange_a

Description: Left flange of shaft

flange_b

Type: Flange_b

Description: Right flange of shaft

Extended by (6)

MultiSensor

Modelica.Mechanics.Rotational.Sensors

Ideal sensor to measure the torque and power between two flanges (= flange_a.tau*der(flange_a.phi)) and the absolute angular velocity

PowerSensor

Modelica.Mechanics.Rotational.Sensors

Ideal sensor to measure the power between two flanges (= flange_a.tau*der(flange_a.phi))

TorqueSensor

Modelica.Mechanics.Rotational.Sensors

Ideal sensor to measure the torque between two flanges (= flange_a.tau)

RelAccSensor

Modelica.Mechanics.Rotational.Sensors

Ideal sensor to measure the relative angular acceleration between two flanges

RelSpeedSensor

Modelica.Mechanics.Rotational.Sensors

Ideal sensor to measure the relative angular velocity between two flanges

RelAngleSensor

Modelica.Mechanics.Rotational.Sensors

Ideal sensor to measure the relative angle between two flanges