Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

This is a 1D translational component with a compliant connection of two translational 1D flanges where inertial effects between the two flanges are not included. The absolute value of the force at the left and the right flange is the same. It is used to built up springs, dampers etc.

Connectors (2)

	flange_a	Type: Flange_a Description: Left flange of compliant 1-dim. translational component
	flange_b	Type: Flange_b Description: Right flange of compliant 1-dim. translational component

flange_a

Type: Flange_a

Description: Left flange of compliant 1-dim. translational component

flange_b

Type: Flange_b

Description: Right flange of compliant 1-dim. translational component

Extended by (4)

	Spring Modelica.Mechanics.Translational.Components Linear 1D translational spring
	SpringDamperNoRelativeStates Modelica.Mechanics.Translational.Examples.Utilities Linear 1D translational spring and damper in parallel (s and v are not used as states)
	GasForce2 Modelica.Mechanics.MultiBody.Examples.Loops.Utilities Rough approximation of gas force in a combustion engine's cylinder
	GasForce Modelica.Mechanics.MultiBody.Examples.Loops.Utilities Simple gas force computation for combustion engine