PartialElementaryOneFlangeAndSupport2

Partial model for a component with one translational 1-dim. shaft flange and a support used for textual modeling, i.e., for elementary models

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

This is a 1-dim. translational component with one flange and a support/housing. It is used to build up elementary components of a drive train with equations in the text layer.

If useSupport=true, the support connector is conditionally enabled and needs to be connected.
If useSupport=false, the support connector is conditionally disabled and instead the component is internally fixed to ground.

Parameters (1)

useSupport

Value: false

Type: Boolean

Description: = true, if support flange enabled, otherwise implicitly grounded

Connectors (2)

flange

Type: Flange_b

Description: Flange of component

support

Type: Support

Description: Support/housing of component

Extended by (7)

Cylinder

Modelica.Thermal.FluidHeatFlow.Components

Simple model of a piston in a cylinder

PartialForce

Modelica.Mechanics.Translational.Interfaces

Partial model of a force acting at the flange (accelerates the flange)

Force

Modelica.Mechanics.Translational.Sources

External force acting on a drive train element as input signal

Move

Modelica.Mechanics.Translational.Sources

Forced movement of a flange according to a position, velocity and acceleration signal

Accelerate

Modelica.Mechanics.Translational.Sources

Forced movement of a flange according to an acceleration signal

Speed

Modelica.Mechanics.Translational.Sources

Forced movement of a flange according to a reference speed

Position

Modelica.Mechanics.Translational.Sources

Forced movement of a flange according to a reference position