Modelica.Electrical.Spice3.Basic

Basic electrical components

Information

This Package contains the basic components of the SPICE3 models. The first letter of the name of the component shows the SPICE name, e.g., R_Resistor: R is the SPICE-name of the component resistor which is used in SPICE-Netlists.

Extends from Modelica.Icons.Package (Icon for standard packages).

Package Content

Name	Description
Ground	Ground node
R_Resistor	Ideal linear electrical resistor
C_Capacitor	Ideal linear electrical capacitor
L_Inductor	Ideal linear electrical inductor
K_CoupledInductors	Inductive coupling via coupling factor
E_VCV	Linear voltage-controlled voltage source
G_VCC	Linear voltage-controlled current source
H_CCV	Linear current-controlled voltage source
F_CCC	Linear current-controlled current source

Modelica.Electrical.Spice3.Basic.Ground

Ground node

Information

Ground of an electrical circuit. The potential at the ground node is zero. Every electrical circuit has to contain at least one ground object.

SPICE does not have an element for the ground node (mass). In SPICE netlists the ground is specified by the node number 0. This Modelica SPICE library demands to describe the ground node by this ground element.

Connectors

Name	Description
p	Ground pin

Modelica.Electrical.Spice3.Basic.R_Resistor

Ideal linear electrical resistor

Information

The linear resistor connects the branch voltage v with the branch current i by i*R = v. The Resistance R is allowed to be positive, zero, or negative.

Extends from Modelica.Electrical.Analog.Interfaces.OnePort (Component with two electrical pins p and n and current i from p to n).

Parameters

Name	Description
R	Resistance [Ohm]

Connectors

Name	Description
p	Positive electrical pin
n	Negative electrical pin

Modelica.Electrical.Spice3.Basic.C_Capacitor

Ideal linear electrical capacitor

Information

The linear capacitor connects the branch voltage v with the branch current i by i = C * dv/dt. The Capacitance C is allowed to be positive, zero, or negative.

Extends from Modelica.Electrical.Analog.Interfaces.OnePort (Component with two electrical pins p and n and current i from p to n).

Parameters

Name	Description
C	Capacitance [F]
IC	Initial value of voltage [V]
UIC	Use initial conditions: true, if initial condition is used

Connectors

Name	Description
p	Positive electrical pin
n	Negative electrical pin

Modelica.Electrical.Spice3.Basic.L_Inductor

Ideal linear electrical inductor

Information

The linear inductor connects the branch voltage v with the branch current i by v = L * di/dt. The inductance L is allowed to be positive, zero, or negative.

Extends from Modelica.Electrical.Analog.Interfaces.OnePort (Component with two electrical pins p and n and current i from p to n).

Parameters

Name	Description
L	Inductance [H]
IC	Initial value; used, if UIC is true [A]
UIC	Use initial conditions

Connectors

Name	Description
p	Positive electrical pin
n	Negative electrical pin
ICP	Pin to couple inductances

Modelica.Electrical.Spice3.Basic.K_CoupledInductors

Inductive coupling via coupling factor

Information

K_CoupledInductors is a component that allows the coupling of two inductors. k is the coefficient of coupling which must be in range [0,1].

The usage is demonstrated in the example CoupledInductors.

Parameters

Name	Description
k	Coupling factor

Connectors

Name	Description
inductiveCouplePin1	Couple pin for inductances
inductiveCouplePin2	Couple pin for inductances

Modelica.Electrical.Spice3.Basic.E_VCV

Linear voltage-controlled voltage source

Information

The linear voltage-controlled voltage source is a TwoPort. The right port voltage at pin p2 (=p2.v) is controlled by the left port voltage at pin p1 (=p1.v) via

p2.v = p1.v * gain.

The left port current is zero. Any voltage gain can be chosen.

The corresponding SPICE description

Ename N+ N- NC+ NC- VALUE

is translated to Modelica:

Ename -> Spice3.Basic.E_VCV Ename
(Ename is the name of the Modelica instance)
N+ -> p2.v
N- -> n2.v
NC+ -> p1.v
NC- -> n1.v
VALUE -> gain

Extends from Interfaces.TwoPortControlledSources (Component with two electrical ports, including current).

Parameters

Name	Description
gain	Voltage gain

Connectors

Name	Description
p1	Positive pin of the controlling port
n1	Negative pin of the controlling port
p2	Positive pin of the controlled port
n2	Negative pin of the controlled port

Modelica.Electrical.Spice3.Basic.G_VCC

Linear voltage-controlled current source

Information

The linear voltage-controlled current source is a TwoPort. The right port current at pin p2 (=p2.i) is controlled by the left port voltage at pin p1 (p1.v) via

p2.i = p1.v * transConductance.

The left port current is zero. Any transConductance can be chosen.

The corresponding SPICE description

Gname N+ N- NC+ NC- VALUE

is translated to Modelica:

Gname -> Spice3.Basic.G_VCC Gname
(Gname is the name of the Modelica instance)
N+ -> p2.i
N- -> n2.i
NC+ -> p1 .v
NC- -> n1.v
VALUE -> transConductance

Extends from Interfaces.TwoPortControlledSources (Component with two electrical ports, including current).

Parameters

Name	Description
transConductance	Transconductance [S]

Connectors

Name	Description
p1	Positive pin of the controlling port
n1	Negative pin of the controlling port
p2	Positive pin of the controlled port
n2	Negative pin of the controlled port

Modelica.Electrical.Spice3.Basic.H_CCV

Linear current-controlled voltage source

Information

The linear current-controlled voltage source is a TwoPort. The "right" port voltage at pin 2 (=p2.v) is controlled by the "left" port current at pin p1(=p1.i) via

p2.v = p1.i * transResistance.

The controlling port voltage is zero. Any transResistance can be chosen. The corresponding SPICE description

Hname N+ N- VNAM VALUE

is translated to Modelica:

Hname -> Spice3.Basic.H_CCV Hname
(Hname is the name of the Modelica instance)
N+ -> p2.v
N- -> n2.v

The voltage source VNAM has the two nodes NV+ and NV-:

VNAM VN+ VN- VALUE_V

The current through VNAM hast to be led through the CCV. Therefore VNAM has to be disconnected and an additional node NV_AD has to be added.

NV_AD -> p1.i
NV- -> n1.i

On this way the current, that flows through the voltage source VNAM, flows through the CCV.

VALUE -> transResistance

Extends from Interfaces.TwoPortControlledSources (Component with two electrical ports, including current).

Parameters

Name	Description
transResistance	Transresistance [Ohm]

Connectors

Name	Description
p1	Positive pin of the controlling port
n1	Negative pin of the controlling port
p2	Positive pin of the controlled port
n2	Negative pin of the controlled port

Modelica.Electrical.Spice3.Basic.F_CCC

Linear current-controlled current source

Information

The linear current-controlled current source is a TwoPort. The "right" port current at pin 2 (=p2.i) is controlled by the "left" port current at pin p1(=p1.i) via

p2.i = p1.i * gain.

The controlling port voltage is zero. Any current gain can be chosen.

The corresponding SPICE description

Fname N+ N- VNAM VALUE

is translated to Modelica:

Fname -> Spice3.Basic.F_CCC Fname
(Fname is the name of the Modelica instance)
N+ -> p2.i
N- -> n2.i

The voltage source VNAM has the two nodes NV+ and NV-:

VNAM NV+ NV- VALUE_V

The current through VNAM hast to be led through the CCC.

Therefore VNAM has to be disconnected and an additional

node NV_AD has to be added.

NV_AD -> p1.i
NV- -> n1.i

On this way the current, that flows through the voltage source VNAM, flows through the CCC.

VALUE -> gain

Extends from Interfaces.TwoPortControlledSources (Component with two electrical ports, including current).

Parameters

Name	Description
gain	Current gain

Connectors

Name	Description
p1	Positive pin of the controlling port
n1	Negative pin of the controlling port
p2	Positive pin of the controlled port
n2	Negative pin of the controlled port

Automatically generated Thu Oct 1 16:07:47 2020.