FlowToPotentialAdaptorSignal adaptor for a connector with flow, 1st derivative of flow, and 2nd derivative of flow as inputs and potential, 1st derivative of potential, and 2nd derivative of potential as outputs (especially useful for FMUs) |
 |
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
Adaptor between a physical connector and a signal representation of the connector signals. This component is used to provide a pure signal interface around a physical model and export this model in form of an input/output block, especially as FMU (Functional Mock-up Unit).
This adaptor has flow, optional 1st derivative of flow, and optional 2nd derivative of flow as input and potential, optional 1st derivative of potential, and optional 2nd derivative of potential as output signals.
Note, the input signals must be consistent to each other (fder=der(f), fder2=der(fder)).
Parameters (4)
| use_pder |
Value: true Type: Boolean Description: Use output for 1st derivative of potential |
|---|---|
| use_pder2 |
Value: true Type: Boolean Description: Use output for 2nd derivative of potential (only if 1st derivative is used, too) |
| use_fder |
Value: true Type: Boolean Description: Use input for 1st derivative of flow |
| use_fder2 |
Value: true Type: Boolean Description: Use input for 2nd derivative of flow (only if 1st derivative is used, too) |
Connectors (6)
 |
p |
Type: RealOutput Description: Output for potential |
|---|---|---|
|
pder |
Type: RealOutput Description: Optional output for der(potential) |
|
pder2 |
Type: RealOutput Description: Optional output for der2(potential) |
 |
f |
Type: RealInput Description: Input for flow |
|
fder |
Type: RealInput Description: Optional input for der(flow) |
|
fder2 |
Type: RealInput Description: Optional input for der2(flow) |
Extended by (4)
 |
GeneralHeatFlowToTemperatureAdaptor Modelica.Thermal.HeatTransfer.Components Signal adaptor for a HeatTransfer port with temperature and derivative of temperature as outputs and heat flow as input (especially useful for FMUs) |
 |
Modelica.Mechanics.Translational.Components Signal adaptor for a Translational flange with position, speed, and acceleration as outputs and force as input (especially useful for FMUs) |
 |
Modelica.Mechanics.Rotational.Components Signal adaptor for a rotational flange with angle, speed, and acceleration as outputs and torque as input (especially useful for FMUs) |
 |
GeneralCurrentToVoltageAdaptor Modelica.Electrical.Analog.Basic Signal adaptor for an Electrical OnePort with voltage and derivative of voltage as outputs and current and derivative of current as inputs (especially useful for FMUs) |