GeneralForceToPositionAdaptorSignal adaptor for a Translational flange with position, speed, and acceleration as outputs and force as input (especially useful for FMUs) |
 |
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
Adaptor between a flange connector and a signal representation of the flange. This component is used to provide a pure signal interface around a Translational model and export this model in form of an input/output block, especially as FMU (Functional Mock-up Unit). Examples of the usage of this adaptor are provided in Translational.Examples.GenerationOfFMUs. This adaptor has force as input and position, velocity and acceleration as output signals.
Parameters (4)
| use_pder |
Value: true Type: Boolean Description: Use output for 1st derivative of potential |
|---|---|
| use_pder2 |
Value: true Type: Boolean Description: Use output for 2nd derivative of potential (only if 1st derivative is used, too) |
| use_fder |
Value: false Type: Boolean Description: Use input for 1st derivative of flow |
| use_fder2 |
Value: false Type: Boolean Description: Use input for 2nd derivative of flow (only if 1st derivative is used, too) |
Connectors (7)
 |
p |
Type: RealOutput Description: Output for potential |
|---|---|---|
|
pder |
Type: RealOutput Description: Optional output for der(potential) |
|
pder2 |
Type: RealOutput Description: Optional output for der2(potential) |
 |
f |
Type: RealInput Description: Input for flow |
|
fder |
Type: RealInput Description: Optional input for der(flow) |
|
fder2 |
Type: RealInput Description: Optional input for der2(flow) |
 |
flange |
Type: Flange_a |
Used in Examples (1)
 |
Modelica.Mechanics.Translational.Examples Example to demonstrate variants to generate FMUs (Functional Mock-up Units) |
Used in Components (1)
 |
Modelica.Mechanics.Translational.Examples.Utilities Input/output block of a direct mass model |