Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

The CurrentSource partial model prepares current sources by providing the pins, and the offset and startTime parameters, which are the same at all current sources. The source behavior is taken from Modelica.Blocks signal sources by inheritance and usage of the replaceable possibilities.

offset	Value: 0 Type: Current (A) Description: Current offset
startTime	Value: 0 Type: Time (s) Description: Time offset

	p	Type: PositivePin Description: Positive electrical pin
	n	Type: NegativePin Description: Negative electrical pin

	signalSource	Type: SignalSource

Extended by (10)

	TableCurrent Modelica.Electrical.Analog.Sources Current source by linear interpolation in a table
	TrapezoidCurrent Modelica.Electrical.Analog.Sources Trapezoidal current source
	SawToothCurrent Modelica.Electrical.Analog.Sources Saw tooth current source
	PulseCurrent Modelica.Electrical.Analog.Sources Pulse current source
	ExponentialsCurrent Modelica.Electrical.Analog.Sources Rising and falling exponential current source
	ExpSineCurrent Modelica.Electrical.Analog.Sources Exponentially damped sine current source
	CosineCurrent Modelica.Electrical.Analog.Sources Cosine current source
	SineCurrent Modelica.Electrical.Analog.Sources Sine current source
	RampCurrent Modelica.Electrical.Analog.Sources Ramp current source
	StepCurrent Modelica.Electrical.Analog.Sources Step current source

CurrentSource

Diagram

Information

Parameters (2)

Connectors (2)

Components (1)

Extended by (10)