Stack

Stack with sensors

Diagram

This information is part of the Modelica Standard Library maintained by the Modelica Association.

This is a stack of Ns x Np cell[Np=1, Ns=1] with measurement, arranged in a matrix.

stackData	Value: Type: BaseStackData
useAllParallelConnections	Value: true Type: Boolean Description: = true, if all parallel connections are used
SOC0	Value: fill(0.1, stackData.Ns, stackData.Np) Type: Real[stackData.Ns,stackData.Np] Description: Initial SOC
SOCtolerance	Value: 1e-9 Type: Real Description: SOC tolerance for detection of depleted or overcharged cell
useHeatPort	Value: false Type: Boolean Description: =true, if HeatPort is enabled
T	Value: 293.15 Type: Temperature (K) Description: Fixed device temperature if useHeatPort = false

displaySOC	Default Value: SOC Type: Real Description: SOC for display

displaySOC

Default Value: SOC

Type: Real

Description: SOC for display

i	Default Value: p.i Type: Current (A) Description: Current into the stack
power	Default Value: v * i Type: Power (W) Description: Power to the stack
SOC	Default Value: socTotal.y Type: Real Description: Overall State of charge

Default Value: p.i

Type: Current (A)

Description: Current into the stack

power

Default Value: v * i

Type: Power (W)

Description: Power to the stack

SOC

Default Value: socTotal.y

Type: Real

Description: Overall State of charge

	p	Type: PositivePin Description: Positive electrical pin
	n	Type: NegativePin Description: Negative electrical pin
	stackBus	Type: StackBus Description: Stack bus
	batteryBus	Type: CellBus Description: Battery bus (average / sum over all cells)
	heatPort	Type: HeatPort_a[stackData.Ns,stackData.Np] Description: Optional port to which dissipated losses are transported in form of heat

	stackData	Type: BaseStackData
	cell	Type: Cell[stackData.Ns,stackData.Np] Description: Matrix of cells
	multiSensor	Type: MultiSensor
	socTotal	Type: RealExpression
	lossesTotal	Type: RealExpression
	temperatureTotal	Type: RealExpression

Modelica.Electrical.Batteries.Examples

Charge a stack with constant current - constant voltage characteristic