ThermalAmbientIMSThermal ambient for induction machine with slipring |
 |
Diagram
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
Thermal ambient for induction machines with slipring rotor to prescribe winding temperatures either constant or via signal connectors. Additionally, all losses = heat flows are recorded.Parameters (5)
| m |
Value: 3 Type: Integer Description: Number of stator phases |
|---|---|
| useTemperatureInputs |
Value: false Type: Boolean Description: If true, temperature inputs are used; else, temperatures are constant |
| Ts |
Value: Type: Temperature (K) Description: Temperature of stator windings |
| mr |
Value: m Type: Integer Description: Number of rotor phases |
| Tr |
Value: Type: Temperature (K) Description: Temperature of rotor windings |
Outputs (8)
| Q_flowStatorWinding |
Default Value: temperatureStatorWinding.port.Q_flow Type: HeatFlowRate (W) Description: Heat flow rate of stator windings |
|---|---|
| Q_flowStatorCore |
Default Value: temperatureStatorCore.port.Q_flow Type: HeatFlowRate (W) Description: Heat flow rate of stator core losses |
| Q_flowRotorCore |
Default Value: temperatureRotorCore.port.Q_flow Type: HeatFlowRate (W) Description: Heat flow rate of stator core losses |
| Q_flowStrayLoad |
Default Value: temperatureStrayLoad.port.Q_flow Type: HeatFlowRate (W) Description: Heat flow rate of stray load losses |
| Q_flowFriction |
Default Value: temperatureFriction.port.Q_flow Type: HeatFlowRate (W) Description: Heat flow rate of friction losses |
| Q_flowRotorWinding |
Default Value: temperatureRotorWinding.port.Q_flow Type: HeatFlowRate (W) Description: Heat flow rate of rotor (squirrel cage) |
| Q_flowBrush |
Default Value: temperatureBrush.port.Q_flow Type: HeatFlowRate (W) Description: Heat flow rate of brushes |
| Q_flowTotal |
Default Value: Q_flowStatorWinding + Q_flowRotorWinding + Q_flowStatorCore + Q_flowRotorCore + Q_flowStrayLoad + Q_flowFriction + Q_flowBrush Type: HeatFlowRate (W) |
Connectors (3)
 |
thermalPort |
Type: ThermalPortIMS |
|---|---|---|
 |
TStatorWinding |
Type: RealInput Description: Temperature of stator windings |
|
TRotorWinding |
Type: RealInput Description: Temperature of rotor windings |
Components (11)
 |
temperatureStatorWinding |
Type: PrescribedTemperature |
|---|---|---|
 |
temperatureStatorCore |
Type: FixedTemperature |
|
temperatureRotorCore |
Type: FixedTemperature |
|
temperatureStrayLoad |
Type: FixedTemperature |
|
temperatureFriction |
Type: FixedTemperature |
 |
constTs |
Type: Constant |
 |
thermalCollectorStator |
Type: ThermalCollector |
|
temperatureRotorWinding |
Type: PrescribedTemperature |
|
constTr |
Type: Constant |
|
thermalCollectorRotor |
Type: ThermalCollector |
|
temperatureBrush |
Type: FixedTemperature |