MultiDeltaDelta (polygon) connection of polyphase systems consisting of multiple base systems |
 |
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
Delta (polygon) connection of a polyphase circuit consisting of multiple base systems (see polyphase guidelines).
Note
If kPolygon<1 or kPolygon>(mBasic - 1)/2, kPolygon is replaced by the value 1 without further warning.
In case of m=2, kPolygon=1 is the only valid choice.
See also
Parameters (4)
| m |
Value: 3 Type: Integer Description: Number of phases |
|---|---|
| kPolygon |
Value: 1 Type: Integer Description: Alternative of polygon |
| mSystems |
Value: numberOfSymmetricBaseSystems(m) Type: Integer Description: Number of base systems |
| mBasic |
Value: integer(m / mSystems) Type: Integer Description: Phase number of base systems |
Connectors (2)
 |
plug_p |
Type: PositivePlug |
|---|---|---|
 |
plug_n |
Type: NegativePlug |
Used in Components (4)
 |
Modelica.Electrical.Machines.Utilities Terminal box Y/D-connection |
 |
Modelica.Electrical.Polyphase.Examples.Utilities Analyze AC voltage, current and power |
 |
Modelica.Electrical.PowerConverters.ACDC.Control Control of 2*m pulse bridge rectifier |
 |
Modelica.Electrical.PowerConverters.ACDC.Control Control of 2*m pulse center tap rectifier |