MultiStarResistance

Resistance connection of star points

Diagram

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

Multi star points are connected by resistors. This model is required to operate polyphase systems with even phase numbers to avoid ideal connections of start points of base systems; see polyphase guidelines.

Parameters (3)

m	Value: 3 Type: Integer Description: Number of phases
mBasic	Value: numberOfSymmetricBaseSystems(m) Type: Integer Description: Number of symmetric base systems
R	Value: 1e6 Type: Resistance (Ω) Description: Insulation resistance between base systems

Value: 3

Type: Integer

Description: Number of phases

mBasic

Value: numberOfSymmetricBaseSystems(m)

Type: Integer

Description: Number of symmetric base systems

Value: 1e6

Type: Resistance (Ω)

Description: Insulation resistance between base systems

Connectors (2)

	plug	Type: PositivePlug
	pin	Type: NegativePin

Components (3)

	multiStar	Type: MultiStar
	resistor	Type: Resistor
	star	Type: Star

Used in Examples (4)

	PolyphaseRectifier Modelica.Electrical.Polyphase.Examples Demonstrate a polyphase diode rectifier
	DiodeBridge2mPulse Modelica.Electrical.PowerConverters.Examples.ACDC.RectifierBridge2mPulse 2*m pulse diode rectifier bridge with resistive load
	HalfControlledBridge2mPulse Modelica.Electrical.PowerConverters.Examples.ACDC.RectifierBridge2mPulse 2*m pulse half controlled rectifier bridge with resistive load
	ThyristorBridge2mPulse_DC_Drive Modelica.Electrical.PowerConverters.Examples.ACDC.RectifierBridge2mPulse 2*m pulse thyristor bridge feeding a DC drive

Used in Components (1)

ThyristorBridge2mPulse

Modelica.Electrical.PowerConverters.Examples.ACDC.ExampleTemplates

Template of 2*m pulse bridge thyristor rectifier