DiodeBridge2PulseTwo pulse Graetz diode rectifier bridge |
 |
Diagram
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
General information about AC/DC converters can be found at the AC/DC converter concept
This is a two pulse Graetz diode rectifier bridge. The circuit topology is the same as in Examples.ACDC.RectifierCenterTap2Pulse.
Parameters (5)
| useHeatPort |
Value: false Type: Boolean Description: = true, if heatPort is enabled |
|---|---|
| T |
Value: 293.15 Type: Temperature (K) Description: Fixed device temperature if useHeatPort = false |
| RonDiode |
Value: 1e-05 Type: Resistance (Ω) Description: Closed diode resistance |
| GoffDiode |
Value: 1e-05 Type: Conductance (S) Description: Opened diode conductance |
| VkneeDiode |
Value: 0 Type: Voltage (V) Description: Diode forward threshold voltage |
Connectors (5)
 |
ac_p |
Type: PositivePin Description: Positive AC input |
|---|---|---|
 |
ac_n |
Type: NegativePin Description: Negative AC input |
|
dc_p |
Type: PositivePin Description: Positive DC output |
|
dc_n |
Type: NegativePin Description: Negative DC output |
 |
heatPort |
Type: HeatPort_a Description: Conditional heat port |
Components (4)
 |
diode_p1 |
Type: IdealDiode Description: Diode connecting the positive AC input pin with positive DC output |
|---|---|---|
|
diode_p2 |
Type: IdealDiode Description: Diode connecting the negative AC input pin with positive DC output |
|
diode_n1 |
Type: IdealDiode Description: Diode connecting the positive AC input pin with negative DC output |
|
diode_n2 |
Type: IdealDiode Description: Diode connecting the negative AC input pin with negative DC output |
Used in Examples (1)
 |
Modelica.Electrical.PowerConverters.Examples.ACDC.RectifierBridge2Pulse Two pulse Graetz diode bridge with resistive load |