IdealDiodeIdeal diode |
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This is an ideal diode, for details see partial model IdealSemiconductor
The diode is conducting if voltage > Vknee.
The diode is locking if current < Vknee*Goff.
useHeatPort |
Value: false Type: Boolean Description: = true, if heatPort is enabled |
---|---|
T |
Value: 293.15 Type: Temperature (K) Description: Fixed device temperature if useHeatPort = false |
Ron |
Value: 1e-5 Type: Resistance (Ω) Description: Forward state-on differential resistance (closed resistance) |
Goff |
Value: 1e-5 Type: Conductance (S) Description: Backward state-off conductance (opened conductance) |
Vknee |
Value: 0 Type: Voltage (V) Description: Forward threshold voltage |
p |
Type: PositivePin Description: Positive electrical pin |
|
---|---|---|
n |
Type: NegativePin Description: Negative electrical pin |
|
heatPort |
Type: HeatPort_a Description: Conditional heat port |
Modelica.Electrical.Analog.Examples Characteristic of ideal diodes |
|
Modelica.Electrical.Analog.Examples B6 diode bridge |
|
ThreePhaseTransformerWithRectifier Modelica.Magnetic.FluxTubes.Examples.Hysteresis Three-phase transformer (including hysteresis effect) with rectifier |
Modelica.Electrical.Analog.Semiconductors Simple triac, based on Semiconductors.Thyristor model |
|
Modelica.Electrical.Polyphase.Ideal Polyphase ideal diode |
|
Modelica.Electrical.PowerConverters.ACDC Two pulse Graetz diode rectifier bridge |
|
Modelica.Electrical.PowerConverters.ACDC Two pulse Graetz half controlled rectifier bridge |
|
Modelica.Electrical.PowerConverters.ACDC Two pulse diode rectifier with center tap |
|
Modelica.Electrical.PowerConverters.DCAC Single-phase DC to AC converter |
|
Modelica.Electrical.PowerConverters.DCDC Step down chopper |
|
Modelica.Electrical.PowerConverters.DCDC Step up chopper |
|
Modelica.Electrical.QuasiStatic.SinglePhase.Utilities Graetz rectifier bridge |