ChopperStepDownStep down chopper including control |
 |
Diagram
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
Step down chopper example template including supply and sensors; load is not yet included
Parameters (8)
| f |
Value: 1000 Type: Frequency (Hz) Description: Switching frequency |
|---|---|
| Vsource |
Value: 60 Type: Voltage (V) Description: Source voltage |
| L |
Value: 25e-3 Type: Inductance (H) Description: Source inductance |
| C |
Value: 20e-6 Type: Capacitance (F) Description: Smoothing capacitance |
| dutyCycle |
Value: 0.20 Type: Real Description: Duty cycle |
| ILoad |
Value: 1.2 Type: Current (A) Description: Load current |
| RLoad |
Value: V0 / ILoad Type: Resistance (Ω) Description: Load resistance |
| V0 |
Value: Vsource * dutyCycle Type: Voltage (V) Description: No-load output voltage |
Components (10)
 |
constantVoltage |
Type: ConstantVoltage |
|---|---|---|
 |
chopperStepDown |
Type: ChopperStepDown |
 |
currentSensor |
Type: CurrentSensor |
 |
voltageSensor |
Type: VoltageSensor |
 |
ground |
Type: Ground |
 |
signalPWM |
Type: SignalPWM |
 |
meanCurrent |
Type: Mean |
|
meanVoltage |
Type: Mean |
 |
inductor |
Type: Inductor |
 |
capacitor |
Type: Capacitor |
Extended by (2)
 |
Modelica.Electrical.PowerConverters.Examples.DCDC.ChopperStepDown Step down chopper with R-L load |
 |
Modelica.Electrical.PowerConverters.Examples.DCDC.ChopperStepDown Step down chopper with resistive load |