TwoPlugElementaryTwo plugs with pin-adapter and reference connection, without declaration of voltage and current |
 |
Diagram
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This partial model uses a positive and negative plug but no complex voltage, current, power, etc. A positive and a negative adapter are used to give easy access to the single pins of both plugs. Additionally, the angular velocity of the quasi-static system is explicitly defined as variable. This model is mainly intended to be used with graphical representation of user models.
See also
Parameters (1)
| m |
Value: 3 Type: Integer Description: Number of phases |
|---|
Connectors (2)
 |
plug_p |
Type: PositivePlug Description: Positive quasi-static polyphase plug |
|---|---|---|
 |
plug_n |
Type: NegativePlug Description: Negative quasi-static polyphase plug |
Components (2)
 |
plugToPins_p |
Type: PlugToPins_p |
|---|---|---|
 |
plugToPins_n |
Type: PlugToPins_n |
Extended by (2)
 |
Modelica.Electrical.QuasiStatic.Polyphase.Interfaces Elementary partial voltage / current sensor |
 |
Modelica.Electrical.QuasiStatic.Polyphase.Interfaces Two plugs with pin-adapter, reference connection and declaration of voltage and current |