IMC_SteinmetzInduction machine with squirrel cage and Steinmetz-connection |
This information is part of the Modelica Standard Library maintained by the Modelica Association.
At start time tStart single-phase voltage is supplied to the induction machine with squirrel cage; the machine starts from standstill, accelerating inertias against load torque quadratic dependent on speed, finally reaching nominal speed.
Default machine parameters are used.
VNominal |
Value: 100 Type: Voltage (V) Description: Nominal RMS voltage per phase |
---|---|
fNominal |
Value: aimcData.fsNominal Type: Frequency (Hz) Description: Nominal frequency |
tStart1 |
Value: 0.1 Type: Time (s) Description: Start time |
Cr |
Value: 0.0035 Type: Capacitance (F) Description: Motor's running capacitor |
Cs |
Value: 5 * Cr Type: Capacitance (F) Description: Motor's (additional) starting capacitor |
wSwitch |
Value: 1350 * 2 * Modelica.Constants.pi / 60 Type: AngularVelocity (rad/s) Description: Speed for switching off the starting capacitor |
TLoad |
Value: 2 / 3 * 161.4 Type: Torque (N·m) Description: Nominal load torque |
wLoad |
Value: 1462.5 * 2 * Modelica.Constants.pi / 60 Type: AngularVelocity (rad/s) Description: Nominal load speed |
JLoad |
Value: 0.29 Type: Inertia (kg·m²) Description: Load's moment of inertia |
aimcData |
Value: Type: IM_SquirrelCageData Description: Induction machine data |
aimc |
Type: IM_SquirrelCage |
|
---|---|---|
sineVoltage |
Type: SineVoltage |
|
ground |
Type: Ground |
|
booleanStep |
Type: BooleanStep |
|
idealCloser |
Type: IdealClosingSwitch |
|
loadInertia |
Type: Inertia |
|
quadraticLoadTorque | ||
TerminalBox1 |
Type: TerminalBox |
|
plugToPin_p3 |
Type: PlugToPin_p |
|
plugToPin_p2 |
Type: PlugToPin_p |
|
plugToPin_p1 |
Type: PlugToPin_p |
|
cRun |
Type: Capacitor |
|
cStart |
Type: Capacitor |
|
idealOpener |
Type: IdealOpeningSwitch |
|
greaterThreshold |
Type: GreaterThreshold |
|
relSpeedSensor |
Type: SpeedSensor |
|
aimcData |
Type: IM_SquirrelCageData Description: Induction machine data |
|
currentQuasiRMSSensor |
Type: CurrentQuasiRMSSensor |