IMC_ConveyorInduction machine with squirrel cage and inverter driving a conveyor |
This information is part of the Modelica Standard Library maintained by the Modelica Association.
An ideal frequency inverter is modeled by using a VfController and a three-phase SignalVoltage. Frequency is driven by a load cycle of acceleration, constant speed, deceleration and standstill. The mechanical load is a constant torque like a conveyor (with regularization around zero speed).
Simulate for 20 seconds and plot (versus time):
Default machine parameters are used.
m |
Value: 3 Type: Integer Description: Number of phases |
---|---|
VNominal |
Value: 100 Type: Voltage (V) Description: Nominal RMS voltage per phase |
fNominal |
Value: imcData.fsNominal Type: Frequency (Hz) Description: Nominal frequency |
wNominal |
Value: 2 * pi * fNominal / imcData.p Type: AngularVelocity (rad/s) Description: Nominal speed |
TLoad |
Value: 161.4 Type: Torque (N·m) Description: Nominal load torque |
JLoad |
Value: 0.29 Type: Inertia (kg·m²) Description: Load's moment of inertia |
r |
Value: 0.05 Type: Length (m) Description: Transmission radius |
imcData |
Value: Type: IM_SquirrelCageData Description: Induction machine data |
imcQS |
Type: IM_SquirrelCage |
|
---|---|---|
currentQuasiRMSSensorQS |
Type: CurrentQuasiRMSSensor |
|
dutyCycle |
Type: CombiTimeTable |
|
vfControllerQS |
Type: VfController |
|
signalVoltageQS |
Type: VariableVoltageSource |
|
starQS |
Type: Star |
|
groundQS |
Type: Ground |
|
terminalBoxQS |
Type: MultiTerminalBox |
|
imcData |
Type: IM_SquirrelCageData Description: Induction machine data |
|
gainQS |
Type: Gain |
|
idealGearR2TQS |
Type: IdealGearR2T |
|
massQS |
Type: Mass |
|
signForceQS |
Type: SignForce |
|
groundMachineQS |
Type: Ground |
|
starMachineQS |
Type: Star |
|
imc |
Type: IM_SquirrelCage |
|
currentQuasiRMSSensor |
Type: CurrentQuasiRMSSensor |
|
vfController |
Type: VfController |
|
signalVoltage |
Type: SignalVoltage |
|
star |
Type: Star |
|
ground |
Type: Ground |
|
terminalBox |
Type: MultiTerminalBox |
|
gain |
Type: Gain |
|
idealGearR2T |
Type: IdealGearR2T |
|
mass |
Type: Mass |
|
signForce |
Type: SignForce |
|
starMachine |
Type: Star |
|
groundMachine |
Type: Ground |