IMS_CharacteristicsCharacteristic curves of induction machine with slip rings |
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This examples allows the investigation of characteristic curves of quasi-static polyphase induction machines with slip ring rotor as a function of rotor speed.
Simulate for 1 second and plot (versus imsQS.wMechanical or perUnitSpeed):
currentSensorQS.abs_i[1]
: (equivalent) RMS stator currentimsQS.tauElectrical
: machine torqueimscQS.powerBalance.powerStator
: stator powerimsQS.powerBalance.powerMechanical
: mechanical powerDefault machine parameters are used. The rotor resistance may be varied to demonstrate the impact on the characteristic curves
m |
Value: 3 Type: Integer Description: Number of stator phases |
---|---|
mr |
Value: 3 Type: Integer Description: Number of rotor phases |
VsNominal |
Value: 100 Type: Voltage (V) Description: Nominal RMS voltage per phase |
fNominal |
Value: imsData.fsNominal Type: Frequency (Hz) Description: Nominal frequency |
Rr |
Value: 0.16 / imsData.turnsRatio ^ 2 Type: Resistance (Ω) Description: Starting resistance |
p |
Value: imsData.p Type: Integer Description: Number of pole pairs |
w_Load |
Value: Modelica.Units.Conversions.from_rpm(1440.45) Type: AngularVelocity (rad/s) Description: Nominal load speed |
imsData |
Value: Type: IM_SlipRingData Description: Induction machine data |
Iqs |
Default Value: iSensorQS.I Type: Current (A) Description: QS RMS current |
---|
terminalBoxQS |
Type: MultiTerminalBox |
|
---|---|---|
imsQS |
Type: IM_SlipRing |
|
imsData |
Type: IM_SlipRingData Description: Induction machine data |
|
vSourceQS |
Type: VoltageSource |
|
starQS |
Type: Star |
|
groundQS |
Type: Ground |
|
pSensorQS |
Type: PowerSensor |
|
iSensorQS |
Type: CurrentQuasiRMSSensor |
|
starMachineQS |
Type: Star |
|
groundMachineQS |
Type: Ground |
|
speed |
Type: Speed |
|
ramp |
Type: Ramp |
|
groundRotorQS |
Type: Ground |
|
starRotorQS |
Type: Star |
|
resistor |
Type: Resistor |