Move_phi

Forced movement of a flange according to an angle signal

Information

This information is part of the Modelica Standard Library maintained by the Modelica Association.

Flange flange is forced to move relative to flange support with a predefined motion according to the input signal u

u[1]: angle of flange
u[2]: angular velocity of flange

The user has to guarantee that the input signals are consistent to each other, i.e., that u[2] is the derivative of u[1].

The input signals can be provided from one of the signal generator blocks of the block library Modelica.Blocks.Sources.

Parameters (1)

useSupport

Value: false

Type: Boolean

Description: = true, if support flange enabled, otherwise implicitly grounded

Connectors (3)

flange

Type: Flange_b

Description: Flange of shaft

support

Type: Support

Description: Support/housing of component

phi

Type: RealInput

Description: Rotation angle of flange with respect to support

Used in Components (1)

AngleToTorqueAdaptor

Modelica.Mechanics.Rotational.Components

Signal adaptor for a Rotational flange with torque as output and angle, speed, and optionally acceleration as inputs (especially useful for FMUs)