Temperature

Type for temperature with medium specific attributes

Type Information

Real

Quantity: ThermodynamicTemperature

Unit: K

Display Unit: degC

Restricted Range: 1 to 1.e4

Nominal Value: 300

Used in Components (30)

EquilibriumDrumBoiler

Modelica.Fluid.Examples.DrumBoiler.BaseClasses

Simple Evaporator with two states, see Åström, Bell: Drum-boiler dynamics, Automatica 36, 2000, pp.363-378

TankWith3InletOutletArraysWithEvaporatorCondensor

Modelica.Fluid.Examples.AST_BatchPlant.BaseClasses

Tank with Heating and Evaporation

TankWithTopPorts

Modelica.Fluid.Examples.AST_BatchPlant.BaseClasses

Tank with inlet/outlet ports and with inlet ports at the top

BasicHX

Modelica.Fluid.Examples.HeatExchanger.BaseClasses

Simple heat exchanger model

OpenTank

Modelica.Fluid.Vessels

Simple tank with inlet/outlet ports

ValveVaporizing

Modelica.Fluid.Valves

Valve for possibly vaporizing (almost) incompressible fluids, accounts for choked flow conditions

FixedBoundary

Modelica.Fluid.Sources

Boundary source component

Boundary_pT

Modelica.Fluid.Sources

Boundary with prescribed pressure, temperature, composition and trace substances

MassFlowSource_T

Modelica.Fluid.Sources

Ideal flow source that produces a prescribed mass flow with prescribed temperature, mass fraction and trace substances

TemperatureTwoPort

Modelica.Fluid.Sensors

Ideal two port temperature sensor

PartialTwoPortTransport

Modelica.Fluid.Interfaces

Partial element transporting fluid between two ports without storage of mass or energy

PartialLumpedVolume

Modelica.Fluid.Interfaces

Lumped volume with mass and energy balance

PartialDistributedVolume

Modelica.Fluid.Interfaces

Base class for distributed volume models

PortVolume

Modelica.Media.Examples.Utilities

Fixed volume associated with a port by the finite volume method

FixedMassFlowRate

Modelica.Media.Examples.Utilities

Ideal pump that produces a constant mass flow rate from a large reservoir at fixed temperature and mass fraction

FixedAmbient

Modelica.Media.Examples.Utilities

Ambient pressure, temperature and mass fraction source

ThermodynamicState

Modelica.Media.Interfaces.TemplateMedium

A selection of variables that uniquely defines the thermodynamic state

BaseProperties

Modelica.Media.Interfaces.PartialMedium

Base properties (p, d, T, h, u, R_s, MM and, if applicable, X and Xi) of a medium

ThermodynamicState

Modelica.Media.Interfaces.PartialLinearFluid

A selection of variables that uniquely defines the thermodynamic state

ThermodynamicState

Modelica.Media.Interfaces.PartialMixtureMedium

Thermodynamic state variables

ThermodynamicState

Modelica.Media.Interfaces.PartialSimpleMedium

Thermodynamic state

ThermodynamicState

Modelica.Media.Interfaces.PartialSimpleIdealGasMedium

Thermodynamic state of ideal gas

SaturationProperties

Modelica.Media.Interfaces.Types

Saturation properties of two phase medium

FluidLimits

Modelica.Media.Interfaces.Types

Validity limits for fluid model

FluidConstants

Modelica.Media.Interfaces.Types.IdealGas

Extended fluid constants

FluidConstants

Modelica.Media.Interfaces.Types.TwoPhase

Extended fluid constants

ThermodynamicState

Modelica.Media.Air.ReferenceAir.Air_Base

Thermodynamic state

ThermodynamicState

Modelica.Media.IdealGases.Common.SingleGasNasa

Thermodynamic state variables for ideal gases

ThermodynamicState

Modelica.Media.R134a.R134a_ph

Thermodynamic state

ThermodynamicState

Modelica.Media.Water.WaterIF97_base

Thermodynamic state