GeneralTemperatureToHeatFlowAdaptorSignal adaptor for a HeatTransfer port with heat flow as output and temperature and derivative of temperature as input (especially useful for FMUs) |
 |
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
Adaptor between a heatport connector and a signal representation of the flange. This component is used to provide a pure signal interface around a HeatTransfer model and export this model in form of an input/output block, especially as FMU (Functional Mock-up Unit). Examples of the usage of this adaptor are provided in HeatTransfer.Examples.GenerationOfFMUs. This adaptor has temperature and derivative of temperature as input signals and heatflow as output signal.
Note, the input signals must be consistent to each other (derT=der(T)).
Parameters (4)
| use_pder |
Value: true Type: Boolean Description: Use input for 1st derivative of potential |
|---|---|
| use_pder2 |
Value: false Type: Boolean Description: Use input for 2nd derivative of potential (only if 1st derivative is used, too) |
| use_fder |
Value: false Type: Boolean Description: Use output for 1st derivative of flow |
| use_fder2 |
Value: false Type: Boolean Description: Use output for 2nd derivative of flow (only if 1st derivative is used, too) |
Connectors (7)
 |
p |
Type: RealInput Description: Input for potential |
|---|---|---|
|
pder |
Type: RealInput Description: Optional input for der(potential) |
|
pder2 |
Type: RealInput Description: Optional input for der2(potential) |
 |
f |
Type: RealOutput Description: Output for flow |
|
fder |
Type: RealOutput Description: Optional output for der(flow) |
|
fder2 |
Type: RealOutput Description: Optional output for der2(flow) |
 |
heatPort |
Type: HeatPort_b |
Used in Components (2)
 |
Modelica.Thermal.HeatTransfer.Examples.Utilities Input/output block of an inverse heatCapacity model |
 |
Modelica.Thermal.HeatTransfer.Examples.Utilities Input/output block of a conduction model |