HeatPort_bThermal port for 1-dim. heat transfer (unfilled rectangular icon) |
 |
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This connector is used for 1-dimensional heat flow between components. The variables in the connector are:
T Temperature in [Kelvin]. Q_flow Heat flow rate in [Watt].
According to the Modelica sign convention, a positive heat flow rate Q_flow is considered to flow into a component. This convention has to be used whenever this connector is used in a model class.
Note, that the two connector classes HeatPort_a and HeatPort_b are identical with the only exception of the different icon layout.
Used in Components (19)
 |
Modelica.Thermal.HeatTransfer.Components Lumped thermal element for heat convection (Q_flow = Gc*dT) |
 |
Modelica.Thermal.HeatTransfer.Components Lumped thermal element for heat convection (dT = Rc*Q_flow) |
 |
Modelica.Thermal.HeatTransfer.Components Collects m heat flows |
 |
Modelica.Thermal.HeatTransfer.Components Collects Ns x Np heat flows |
 |
GeneralTemperatureToHeatFlowAdaptor Modelica.Thermal.HeatTransfer.Components Signal adaptor for a HeatTransfer port with heat flow as output and temperature and derivative of temperature as input (especially useful for FMUs) |
 |
Modelica.Thermal.HeatTransfer.Sensors Relative temperature sensor |
 |
Modelica.Thermal.HeatTransfer.Sensors Heat flow rate sensor |
 |
ConditionalFixedHeatFlowSensor Modelica.Thermal.HeatTransfer.Sensors HeatFlowSensor, conditional fixed temperature |
 |
Modelica.Thermal.HeatTransfer.Sources Fixed temperature boundary condition in Kelvin |
 |
Modelica.Thermal.HeatTransfer.Sources Variable temperature boundary condition in Kelvin |
 |
Modelica.Thermal.HeatTransfer.Sources Fixed heat flow boundary condition |
 |
Modelica.Thermal.HeatTransfer.Sources Prescribed heat flow boundary condition |
 |
Modelica.Thermal.HeatTransfer.Celsius Fixed temperature boundary condition in degree Celsius |
 |
Modelica.Thermal.HeatTransfer.Celsius Variable temperature boundary condition in degCelsius |
 |
Modelica.Thermal.HeatTransfer.Fahrenheit Fixed temperature boundary condition in degFahrenheit |
 |
Modelica.Thermal.HeatTransfer.Fahrenheit Variable temperature boundary condition in degFahrenheit |
 |
Modelica.Thermal.HeatTransfer.Rankine Fixed temperature boundary condition in degRankine |
 |
Modelica.Thermal.HeatTransfer.Rankine Variable temperature boundary condition in degRankine |
 |
Modelica.Thermal.HeatTransfer.Interfaces Partial heat transfer element with two HeatPort connectors that does not store energy |