PartialElementaryConditionalHeatPortWithoutTPartial model to include a conditional HeatPort in order to dissipate losses, used for textual modeling, i.e., for elementary models |
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This partial model provides a conditional heat port for dissipating losses.
- If useHeatPort is set to false (default), no heat port is available, and the thermal loss power is dissipated internally.
- If useHeatPort is set to true, the heat port is available and must be connected from the outside.
If this model is used, the loss power has to be provided by an equation in the model which inherits from the PartialElementaryConditionalHeatPortWithoutT model (lossPower = ...).
Note, this partial model is used in cases, where heatPort.T (that is the device temperature) is not utilized in the model. If this is desired, inherit instead from partial model PartialElementaryConditionalHeatPort.
Parameters (1)
| useHeatPort |
Value: false Type: Boolean Description: = true, if heatPort is enabled |
|---|
Connectors (1)
 |
heatPort |
Type: HeatPort_a Description: Optional port to which dissipated losses are transported in form of heat |
|---|
Extended by (26)
 |
Modelica.Mechanics.Translational.Components Sliding mass with hard stop and Stribeck friction |
 |
Modelica.Mechanics.Translational.Components Brake based on Coulomb friction |
 |
Modelica.Mechanics.Translational.Components Coulomb friction in support |
 |
Modelica.Mechanics.Translational.Components 1D translational spring damper combination with gap |
 |
Modelica.Mechanics.Translational.Components Linear 1D translational spring and damper in parallel |
 |
Modelica.Mechanics.Translational.Components Linear 1D translational damper |
 |
Modelica.Mechanics.Translational.Examples.Utilities Linear 1D translational spring and damper in parallel (s and v are not used as states) |
 |
Modelica.Mechanics.Rotational.Components Gear with mesh efficiency and bearing friction (stuck/rolling possible) |
 |
Modelica.Mechanics.Rotational.Components Parallel connection of freewheel and clutch |
 |
Modelica.Mechanics.Rotational.Components Clutch based on Coulomb friction |
 |
Modelica.Mechanics.Rotational.Components Brake based on Coulomb friction |
 |
Modelica.Mechanics.Rotational.Components Coulomb friction in bearings |
 |
Modelica.Mechanics.Rotational.Components Backlash connected in series to linear spring and damper (backlash is modeled with elasticity; at start of contact the flange torque can jump, contrary to the ElastoBacklash model) |
 |
Modelica.Mechanics.Rotational.Components Backlash connected in series to linear spring and damper (backlash is modeled with elasticity) |
 |
Modelica.Mechanics.Rotational.Components Linear 1D rotational spring and damper in parallel |
 |
Modelica.Mechanics.Rotational.Components Linear 1D rotational damper |
 |
Modelica.Mechanics.Rotational.Examples.Utilities Linear 1D rotational spring and damper in parallel (phi and w are not used as states) |
 |
Modelica.Magnetic.QuasiStatic.FundamentalWave.Losses Model of permanent magnet losses dependent on current and speed |
 |
Modelica.Magnetic.QuasiStatic.FundamentalWave.Losses Model of stray load losses dependent on current and speed |
 |
Modelica.Electrical.Machines.Losses.DCMachines Model of core losses |
 |
Modelica.Electrical.Machines.Losses.DCMachines Model of stray load losses dependent on current and speed |
 |
Modelica.Electrical.Machines.Losses.DCMachines Model considering voltage drop of carbon brushes |
 |
Modelica.Electrical.Machines.Losses.InductionMachines Model of core losses |
 |
Modelica.Electrical.Machines.Losses.InductionMachines Model of permanent magnet losses dependent on current and speed |
 |
Modelica.Electrical.Machines.Losses.InductionMachines Model of stray load losses dependent on current and speed |
 |
Modelica.Electrical.Machines.Losses Model of angular velocity dependent friction losses |