This icon indicates a package that contains records
Extends from Modelica.Icons.RecordsPackage
(Icon for package containing records).
Name | Description |
---|---|
EvenGap | Input for even gap |
General | Input for generic correlation |
HelicalPipe | Input for helical pipe |
Plate | Input for plate |
StraightPipe | Input for straight pipe |
TwoPhaseFlowHT_IN_con | Base record for two phase heat transfer coefficient |
TwoPhaseFlowHT_IN_var | Base record for two phase heat transfer coefficient |
This icon is indicates a record.
Extends from Modelica.Icons.Record
(Icon for records).
Type | Name | Description |
---|---|---|
kc_evenGap | target | Target variable of calculation |
Length | h | Height of cross sectional area |
Length | s | Distance between parallel plates in cross sectional area |
Length | L | Overflowed length of gap |
This icon is indicates a record.
Extends from Modelica.Icons.Record
(Icon for records).
Type | Name | Description |
---|---|---|
kc_general | target | Target correlation |
Area | A_cross | Cross sectional area |
Length | perimeter | Wetted perimeter |
This icon is indicates a record.
Extends from Modelica.Icons.Record
(Icon for records).
Type | Name | Description |
---|---|---|
Real | n_nt | Total number of turns |
Diameter | d_hyd | Hydraulic diameter |
Length | h | Distance between turns |
Length | L | Total length of helical pipe |
This icon is indicates a record.
Extends from Modelica.Icons.Record
(Icon for records).
Type | Name | Description |
---|---|---|
Length | L | Length of plate |
This icon is indicates a record.
Extends from Modelica.Icons.Record
(Icon for records).
Type | Name | Description |
---|---|---|
Diameter | d_hyd | Hydraulic diameter |
Length | L | Length |
This icon is indicates a record.
Extends from Modelica.Icons.Record
(Icon for records).
Type | Name | Description |
---|---|---|
TwoPhaseHeatTransferTarget | target | Choice of (horizontal/vertical) boiling or (horizontal) condensation in pipe |
Area | A_cross | Cross sectional area |
Length | perimeter | Wetted perimeter |
MolarMass_gpmol | MM | Molar mass of fluid |
Pressure | p_crit | Critical pressure of fluid |
This icon is indicates a record.
Extends from Modelica.Icons.Record
(Icon for records).
Type | Name | Description |
---|---|---|
TwoPhaseHeatTransferTarget | target | Choice of (horizontal/vertical) boiling or (horizontal) condensation in pipe |
SpecificHeatCapacityAtConstantPressure | cp_l | Specific heat capacity of liquid |
ThermalConductivity | lambda_l | Thermal conductivity of liquid |
Density | rho_g | Density of gas |
Density | rho_l | Density of liquid |
DynamicViscosity | eta_g | Dynamic viscosity of gas |
DynamicViscosity | eta_l | Dynamic viscosity of liquid |
Pressure | pressure | Mean pressure of fluid |
SpecificEnthalpy | dh_lg | Evaporation enthalpy of fluid |
MassFlowRate | m_flow | Mass flow rate |
HeatFlux | qdot_A | Heat flux at boiling |
Real | x_flow | Mass flow rate quality |
Generated 2018-12-12 12:13:36 EST by MapleSim.