This linear compressibility fluid model is based on the assumptions that:
That means that the density is a linear function in temperature and in pressure. In order to define the complete model, a number of constant reference values are needed which are computed at the reference values of the states pressure p and temperature T. The model can be interpreted as a linearization of a full non-linear fluid model (but it is not linear in all thermodynamic coordinates). Reference values are needed for
Apart from that, a user needs to define the molar mass, MM_const. Note that it is possible to define a fluid by computing the reference values from a full non-linear fluid model by computing the package constants using the standard functions defined in a fluid package (see example in liquids package).
In order to avoid numerical inversion of the temperature in the T_ph and T_ps functions, the density is always taken to be the reference density in the computation of h, s, u and cv. For liquids (and this model is intended only for liquids) the relative error of doing so is 1e-3 to 1e-4 at most. The model would be more "correct" based on the other assumptions, if occurrences of reference_d in the computations of h,s,u and cv would be replaced by a call to density(state). That would require a numerical solution for T_ps, while T_ph can be solved symbolically from a quadratic function. Errors from this approximation are small because liquid density varies little.
One of the main reasons to use a simple, linear fluid model is to achieve high performance in simulations. There are a number of possible compromises and possibilities to improve performance. Some of them can be influenced by a flag. The following rules where used in this model:
Extends from Modelica.Media.Interfaces.PartialPureSubstance
(Base class for pure substances of one chemical substance).
Name | Description |
---|---|
AbsolutePressure | Type for absolute pressure with medium specific attributes |
BaseProperties | Base properties of medium |
Basic … | The most basic version of a record used in several degrees of detail |
beta | Alias for isobaricExpansionCoefficient for user convenience |
Choices … |   |
CumulativeExtraProperty | Type for conserved integral of unspecified, mass specific property |
Density | Type for density with medium specific attributes |
density | Return the density from the thermodynamic state |
density_derh_p | Return density derivative w.r.t. specific enthalpy at constant pressure |
density_derp_h | Return density derivative w.r.t. pressure at const specific enthalpy |
density_derp_T | Return density derivative w.r.t. pressure at const temperature |
density_derT_p | Return density derivative w.r.t. temperature at constant pressure |
density_derX | Returns the partial derivative of density with respect to mass fractions at constant pressure and temperature |
density_ph | Return density from p and h |
density_phX | Return density from p, h, and X or Xi |
density_ps | Return density from p and s |
density_psX | Return density from p, s, and X or Xi |
density_pT | Return density from p and T |
density_pTX | Return density from p, T, and X or Xi |
DerDensityByEnthalpy | Type for partial derivative of density with respect to enthalpy with medium specific attributes |
DerDensityByPressure | Type for partial derivative of density with respect to pressure with medium specific attributes |
DerDensityByTemperature | Type for partial derivative of density with respect to temperature with medium specific attributes |
DerEnthalpyByPressure | Type for partial derivative of enthalpy with respect to pressure with medium specific attributes |
DerTemperatureByPressure | Type for partial derivative of temperature with respect to pressure with medium specific attributes |
DipoleMoment | Type for dipole moment with medium specific attributes |
DynamicViscosity | Type for dynamic viscosity with medium specific attributes |
dynamicViscosity | Return dynamic viscosity |
EnthalpyFlowRate | Type for enthalpy flow rate with medium specific attributes |
ExtraProperty | Type for unspecified, mass-specific property transported by flow |
ExtraPropertyFlowRate | Type for flow rate of unspecified, mass-specific property |
FixedPhase | Phase of the fluid: 1 for 1-phase, 2 for two-phase, 0 for not known, e.g., interactive use |
FluidConstants | Critical, triple, molecular and other standard data of fluid |
FluidLimits | Validity limits for fluid model |
heatCapacity_cp | Alias for deprecated name |
heatCapacity_cv | Alias for deprecated name |
IdealGas … | The ideal gas version of a record used in several degrees of detail |
isentropicEnthalpy | Return isentropic enthalpy |
IsentropicExponent | Type for isentropic exponent with medium specific attributes |
isentropicExponent | Return isentropic exponent from the thermodynamic state |
IsobaricExpansionCoefficient | Type for isobaric expansion coefficient with medium specific attributes |
isobaricExpansionCoefficient | Return the isobaric expansion coefficient |
isothermalCompressibility | Return the isothermal compressibility kappa |
kappa | Alias of isothermalCompressibility for user convenience |
MassFlowRate | Type for mass flow rate with medium specific attributes |
MassFraction | Type for mass fraction with medium specific attributes |
MolarMass | Type for molar mass with medium specific attributes |
molarMass | Return molar mass |
MolarVolume | Type for molar volume with medium specific attributes |
MoleFraction | Type for mole fraction with medium specific attributes |
PrandtlNumber | Type for Prandtl number with medium specific attributes |
prandtlNumber | Return the Prandtl number |
pressure | Return the pressure from the thermodynamic state |
pressure_dT | Return pressure from d and T |
SaturationProperties | Saturation properties of two phase medium |
setSmoothState | Return thermodynamic state so that it smoothly approximates: if x > 0 then state_a else state_b |
setState_dT | Return thermodynamic state from d and T |
setState_dTX | Set the thermodynamic state record from d and T (X not needed) |
setState_ph | Return thermodynamic state from p and h |
setState_phX | Set the thermodynamic state record from p and h (X not needed) |
setState_ps | Return thermodynamic state from p and s |
setState_psX | Set the thermodynamic state record from p and s (X not needed) |
setState_pT | Return thermodynamic state from p and T |
setState_pTX | Set the thermodynamic state record from p and T (X not needed) |
SpecificEnergy | Type for specific energy with medium specific attributes |
SpecificEnthalpy | Type for specific enthalpy with medium specific attributes |
specificEnthalpy | Return the specific enthalpy from the thermodynamic state |
specificEnthalpy_dT | Return specific enthalpy from d and T |
specificEnthalpy_ps | Return specific enthalpy from p and s |
specificEnthalpy_psX | Return specific enthalpy from p, s, and X or Xi |
specificEnthalpy_pT | Return specific enthalpy from p and T |
specificEnthalpy_pTX | Return specific enthalpy from p, T, and X or Xi |
SpecificEntropy | Type for specific entropy with medium specific attributes |
specificEntropy | Return the specific entropy from the thermodynamic state |
specificEntropy_pTX | Return specific enthalpy from p, T, and X or Xi |
specificGibbsEnergy | Return specific Gibbs energy from the thermodynamic state |
SpecificHeatCapacity | Type for specific heat capacity with medium specific attributes |
specificHeatCapacityCp | Return specific heat capacity at constant volume |
specificHeatCapacityCv | Return specific heat capacity at constant volume from the thermodynamic state |
specificHelmholtzEnergy | Return specific Helmholtz energy from the thermodynamic state |
SpecificInternalEnergy | Type for specific internal energy with medium specific attributes |
specificInternalEnergy | Return the specific internal energy from the thermodynamic state |
SurfaceTension | Type for surface tension with medium specific attributes |
T_ph | Return temperature from pressure and specific enthalpy |
T_ps | Return temperature from pressure and specific entropy |
Temperature | Type for temperature with medium specific attributes |
temperature | Return the temperature from the thermodynamic state |
temperature_ph | Return temperature from p and h |
temperature_phX | Return temperature from p, h, and X or Xi |
temperature_ps | Return temperature from p and s |
temperature_psX | Return temperature from p,s, and X or Xi |
ThermalConductivity | Type for thermal conductivity with medium specific attributes |
thermalConductivity | Return thermal conductivity |
ThermodynamicState | A selection of variables that uniquely defines the thermodynamic state |
TwoPhase … | The two phase fluid version of a record used in several degrees of detail |
VelocityOfSound | Type for velocity of sound with medium specific attributes |
velocityOfSound | Return velocity of sound from the thermodynamic state |
Type | Name | Value | Description |
---|---|---|---|
ExtraProperty | C_default[nC] | fill(0, nC) | Default value for trace substances of medium (for initialization) |
Real | C_nominal[nC] | 1e-6 * ones(nC) | Default for the nominal values for the extra properties |
String | extraPropertiesNames[:] | fill("", 0) | Names of the additional (extra) transported properties. Set extraPropertiesNames=fill("",0) if unused |
final Boolean | fixedX | true | = true if medium contains the equation X = reference_X |
SpecificEnthalpy | h_default | specificEnthalpy_pTX(p_default, T_default, X_default) | Default value for specific enthalpy of medium (for initialization) |
String | mediumName | "unusablePartialMedium" | Name of the medium |
final Integer | nC | size(extraPropertiesNames, 1) | Number of extra (outside of standard mass-balance) transported properties |
final Integer | nS | size(substanceNames, 1) | Number of substances |
Integer | nX | nS | Number of mass fractions |
Integer | nXi | if fixedX then 0 else if reducedX then nS - 1 else nS | Number of structurally independent mass fractions (see docu for details) |
AbsolutePressure | p_default | 101325 | Default value for pressure of medium (for initialization) |
final Boolean | reducedX | true | = true if medium contains the equation sum(X) = 1.0; set reducedX=true if only one substance (see docu for details) |
AbsolutePressure | reference_p | 101325 | Reference pressure of Medium: default 1 atmosphere |
Temperature | reference_T | 298.15 | Reference temperature of Medium: default 25 deg Celsius |
MassFraction | reference_X[nX] | fill(nX ^ (-1), nX) | Default mass fractions of medium |
Boolean | singleState | false | = true, if u and d are not a function of pressure |
String | substanceNames[:] | {mediumName} | Names of the mixture substances. Set substanceNames={mediumName} if only one substance. |
Temperature | T_default | Modelica.SIunits.Conversions.from_degC(20) | Default value for temperature of medium (for initialization) |
IndependentVariables | ThermoStates | Modelica.Media.Interfaces.Choices.IndependentVariables.pTX | Enumeration type for independent variables |
MassFraction | X_default[nX] | reference_X | Default value for mass fractions of medium (for initialization) |
Extends from Modelica.SIunits.AbsolutePressure
.
Name | Value |
---|---|
quantity | "Pressure" |
unit | "Pa" |
displayUnit | "bar" |
min | 0 |
max | 1e+8 |
start | 100000 |
nominal | 100000 |
Extends from Modelica.SIunits.Density
.
Name | Value |
---|---|
quantity | "Density" |
unit | "kg/m3" |
displayUnit | "g/cm3" |
min | 0 |
max | 100000 |
start | 1 |
nominal | 1 |
Extends from Modelica.SIunits.DynamicViscosity
.
Name | Value |
---|---|
quantity | "DynamicViscosity" |
unit | "Pa.s" |
min | 0 |
max | 1e+8 |
start | 0.001 |
nominal | 0.001 |
Extends from Modelica.SIunits.EnthalpyFlowRate
.
Name | Value |
---|---|
quantity | "EnthalpyFlowRate" |
unit | "W" |
min | -1e+8 |
max | 1e+8 |
start | 0. |
nominal | 1000 |
Extends from Real
.
Name | Value |
---|---|
quantity | "MassFraction" |
unit | "kg/kg" |
min | 0 |
max | 1 |
start | 0. |
nominal | 0.1 |
Extends from Real
.
Name | Value |
---|---|
quantity | "MoleFraction" |
unit | "mol/mol" |
min | 0 |
max | 1 |
start | 0. |
nominal | 0.1 |
Extends from Modelica.SIunits.MolarMass
.
Name | Value |
---|---|
quantity | "MolarMass" |
unit | "kg/mol" |
min | 0.001 |
max | 0.25 |
start | 0. |
nominal | 0.032 |
Extends from Modelica.SIunits.MolarVolume
.
Name | Value |
---|---|
quantity | "MolarVolume" |
unit | "m3/mol" |
min | 1e-6 |
max | 1000000 |
start | 0. |
nominal | 1 |
Extends from Modelica.SIunits.RatioOfSpecificHeatCapacities
.
Name | Value |
---|---|
quantity | "RatioOfSpecificHeatCapacities" |
unit | "1" |
min | 1 |
max | 500000 |
start | 1.2 |
nominal | 1.2 |
Extends from Modelica.SIunits.SpecificEnergy
.
Name | Value |
---|---|
quantity | "SpecificEnergy" |
unit | "J/kg" |
min | -1e+8 |
max | 1e+8 |
start | 0. |
nominal | 1000000 |
Extends from Modelica.Media.Interfaces.PartialLinearFluid.SpecificEnergy
(Type for specific energy with medium specific attributes).
Name | Value |
---|---|
quantity | "SpecificEnergy" |
unit | "J/kg" |
min | -1e+8 |
max | 1e+8 |
start | 0. |
nominal | 1000000 |
Extends from Modelica.SIunits.SpecificEnthalpy
.
Name | Value |
---|---|
quantity | "SpecificEnergy" |
unit | "J/kg" |
min | -1e+10 |
max | 1e+10 |
start | 0. |
nominal | 1000000 |
Extends from Modelica.SIunits.SpecificEntropy
.
Name | Value |
---|---|
quantity | "SpecificEntropy" |
unit | "J/(kg.K)" |
min | -1e+7 |
max | 1e+7 |
start | 0. |
nominal | 1000 |
Extends from Modelica.SIunits.SpecificHeatCapacity
.
Name | Value |
---|---|
quantity | "SpecificHeatCapacity" |
unit | "J/(kg.K)" |
min | 0 |
max | 1e+7 |
start | 1000 |
nominal | 1000 |
Extends from Modelica.SIunits.SurfaceTension
.
Name | Value |
---|---|
quantity | "SurfaceTension" |
unit | "N/m" |
min | -Modelica.Constants.inf |
max | Modelica.Constants.inf |
start | 0. |
Extends from Modelica.SIunits.Temperature
.
Name | Value |
---|---|
quantity | "ThermodynamicTemperature" |
unit | "K" |
displayUnit | "degC" |
min | 1 |
max | 10000 |
start | 288.15 |
nominal | 300 |
Extends from Modelica.SIunits.ThermalConductivity
.
Name | Value |
---|---|
quantity | "ThermalConductivity" |
unit | "W/(m.K)" |
min | 0 |
max | 500 |
start | 1 |
nominal | 1 |
Extends from Modelica.SIunits.PrandtlNumber
.
Name | Value |
---|---|
quantity | "PrandtlNumber" |
unit | "1" |
min | 0.001 |
max | 100000 |
start | 0. |
nominal | 1 |
Extends from Modelica.SIunits.Velocity
.
Name | Value |
---|---|
quantity | "Velocity" |
unit | "m/s" |
min | 0 |
max | 100000 |
start | 1000 |
nominal | 1000 |
Extends from Real
.
Name | Value |
---|---|
min | 0 |
max | Modelica.Constants.inf |
start | 1 |
Extends from Real
.
Name | Value |
---|---|
min | 0 |
max | Modelica.Constants.inf |
start | 1 |
Extends from Real
.
Name | Value |
---|---|
unit | "kg/s" |
min | -Modelica.Constants.inf |
max | Modelica.Constants.inf |
start | 0. |
Extends from Real
.
Name | Value |
---|---|
unit | "1/K" |
min | 0 |
max | 1e+8 |
start | 0. |
Extends from Real
.
Name | Value |
---|---|
quantity | "ElectricDipoleMoment" |
unit | "debye" |
min | 0 |
max | 2 |
start | 0. |
Extends from Modelica.SIunits.DerDensityByPressure
.
Name | Value |
---|---|
unit | "s2/m2" |
min | -Modelica.Constants.inf |
max | Modelica.Constants.inf |
start | 0. |
Extends from Modelica.SIunits.DerDensityByEnthalpy
.
Name | Value |
---|---|
unit | "kg.s2/m5" |
min | -Modelica.Constants.inf |
max | Modelica.Constants.inf |
start | 0. |
Extends from Modelica.SIunits.DerEnthalpyByPressure
.
Name | Value |
---|---|
unit | "J.m.s2/kg2" |
min | -Modelica.Constants.inf |
max | Modelica.Constants.inf |
start | 0. |
Extends from Modelica.SIunits.DerDensityByTemperature
.
Name | Value |
---|---|
unit | "kg/(m3.K)" |
min | -Modelica.Constants.inf |
max | Modelica.Constants.inf |
start | 0. |
Extends from Real
.
Name | Value |
---|---|
unit | "K/Pa" |
min | -Modelica.Constants.inf |
max | Modelica.Constants.inf |
start | 0. |
This icon is indicates a record.
Extends from Modelica.Icons.Record
(Icon for records).
Type | Name | Description |
---|---|---|
AbsolutePressure | psat | Saturation pressure |
Temperature | Tsat | Saturation temperature |
The minimum pressure mostly applies to the liquid state only. The minimum density is also arbitrary, but is reasonable for technical applications to limit iterations in non-linear systems. The limits in enthalpy and entropy are used as safeguards in inverse iterations.
Extends from Modelica.Icons.Record
(Icon for records).
Type | Name | Description |
---|---|---|
Temperature | TMIN | Minimum temperature |
Temperature | TMAX | Maximum temperature |
Density | DMIN | Minimum density |
Density | DMAX | Maximum density |
AbsolutePressure | PMIN | Minimum pressure |
AbsolutePressure | PMAX | Maximum pressure |
SpecificEnthalpy | HMIN | Minimum enthalpy |
SpecificEnthalpy | HMAX | Maximum enthalpy |
SpecificEntropy | SMIN | Minimum entropy |
SpecificEntropy | SMAX | Maximum entropy |
Extends from Integer
.
Name | Value |
---|---|
min | 0 |
max | 2 |
start | 0 |
This icon is indicates a record.
Extends from Modelica.Media.Interfaces.Types.Basic.FluidConstants
(Critical, triple, molecular and other standard data of fluid).
Type | Name | Description |
---|---|---|
String | iupacName | Complete IUPAC name (or common name, if non-existent) |
String | casRegistryNumber | Chemical abstracts sequencing number (if it exists) |
String | chemicalFormula | Chemical formula, (brutto, nomenclature according to Hill |
String | structureFormula | Chemical structure formula |
MolarMass | molarMass | Molar mass |
This icon is indicates a record.
Extends from Modelica.Icons.Record
(Icon for records).
Type | Name | Description |
---|---|---|
AbsolutePressure | p | Absolute pressure of medium |
Temperature | T | Temperature of medium |
Model BaseProperties is a model within package PartialMedium and contains the declarations of the minimum number of variables that every medium model is supposed to support. A specific medium inherits from model BaseProperties and provides the equations for the basic properties.
The BaseProperties model contains the following 7+nXi variables (nXi is the number of independent mass fractions defined in package PartialMedium):
Variable | Unit | Description |
T | K | temperature |
p | Pa | absolute pressure |
d | kg/m3 | density |
h | J/kg | specific enthalpy |
u | J/kg | specific internal energy |
Xi[nXi] | kg/kg | independent mass fractions m_i/m |
R | J/kg.K | gas constant |
M | kg/mol | molar mass |
In order to implement an actual medium model, one can extend from this base model and add 5 equations that provide relations among these variables. Equations will also have to be added in order to set all the variables within the ThermodynamicState record state.
If standardOrderComponents=true, the full composition vector X[nX] is determined by the equations contained in this base class, depending on the independent mass fraction vector Xi[nXi].
Additional 2 + nXi equations will have to be provided when using the BaseProperties model, in order to fully specify the thermodynamic conditions. The input connector qualifier applied to p, h, and nXi indirectly declares the number of missing equations, permitting advanced equation balance checking by Modelica tools. Please note that this doesn't mean that the additional equations should be connection equations, nor that exactly those variables should be supplied, in order to complete the model. For further information, see the Modelica.Media User's guide, and Section 4.7 (Balanced Models) of the Modelica 3.0 specification.
Extends from Modelica.Media.Interfaces.PartialPureSubstance.BaseProperties
.
Type | Name | Default | Description |
---|---|---|---|
Boolean | preferredMediumStates | false | = true if StateSelect.prefer shall be used for the independent property variables of the medium |
final Boolean | standardOrderComponents | true | If true, and reducedX = true, the last element of X will be computed from the other ones |
Type | Name | Description |
---|---|---|
input InputAbsolutePressure | p | Absolute pressure of medium |
input InputMassFraction | Xi[nXi] | Structurally independent mass fractions |
input InputSpecificEnthalpy | h | Specific enthalpy of medium |
This icon indicates Modelica functions.
Extends from Modelica.Media.Interfaces.PartialPureSubstance.setState_pTX
(Return thermodynamic state as function of p, T and composition X or Xi).
Type | Name | Description |
---|---|---|
AbsolutePressure | p | Pressure |
Temperature | T | Temperature |
MassFraction | X[:] | Mass fractions |
Type | Name | Description |
---|---|---|
ThermodynamicState | state | Thermodynamic state record |
This icon indicates Modelica functions.
Extends from Modelica.Media.Interfaces.PartialPureSubstance.setState_phX
(Return thermodynamic state as function of p, h and composition X or Xi).
Type | Name | Description |
---|---|---|
AbsolutePressure | p | Pressure |
SpecificEnthalpy | h | Specific enthalpy |
MassFraction | X[:] | Mass fractions |
Type | Name | Description |
---|---|---|
ThermodynamicState | state | Thermodynamic state record |
This icon indicates Modelica functions.
Extends from Modelica.Media.Interfaces.PartialPureSubstance.setState_psX
(Return thermodynamic state as function of p, s and composition X or Xi).
Type | Name | Description |
---|---|---|
AbsolutePressure | p | Pressure |
SpecificEntropy | s | Specific entropy |
MassFraction | X[:] | Mass fractions |
Type | Name | Description |
---|---|---|
ThermodynamicState | state | Thermodynamic state record |
This icon indicates Modelica functions.
Extends from Modelica.Media.Interfaces.PartialPureSubstance.setState_dTX
(Return thermodynamic state as function of d, T and composition X or Xi).
Type | Name | Description |
---|---|---|
Density | d | Density |
Temperature | T | Temperature |
MassFraction | X[:] | Mass fractions |
Type | Name | Description |
---|---|---|
ThermodynamicState | state | Thermodynamic state record |
This function is used to approximate the equation
state = if x > 0 then state_a else state_b;
by a smooth characteristic, so that the expression is continuous and differentiable:
state := smooth(1, if x > x_small then state_a else if x < -x_small then state_b else f(state_a, state_b));
This is performed by applying function Media.Common.smoothStep(..) on every element of the thermodynamic state record.
If mass fractions X[:] are approximated with this function then this can be performed for all nX mass fractions, instead of applying it for nX-1 mass fractions and computing the last one by the mass fraction constraint sum(X)=1. The reason is that the approximating function has the property that sum(state.X) = 1, provided sum(state_a.X) = sum(state_b.X) = 1. This can be shown by evaluating the approximating function in the abs(x) < x_small region (otherwise state.X is either state_a.X or state_b.X):
X[1] = smoothStep(x, X_a[1] , X_b[1] , x_small); X[2] = smoothStep(x, X_a[2] , X_b[2] , x_small); ... X[nX] = smoothStep(x, X_a[nX], X_b[nX], x_small);
or
X[1] = c*(X_a[1] - X_b[1]) + (X_a[1] + X_b[1])/2 X[2] = c*(X_a[2] - X_b[2]) + (X_a[2] + X_b[2])/2; ... X[nX] = c*(X_a[nX] - X_b[nX]) + (X_a[nX] + X_b[nX])/2; c = (x/x_small)*((x/x_small)^2 - 3)/4
Summing all mass fractions together results in
sum(X) = c*(sum(X_a) - sum(X_b)) + (sum(X_a) + sum(X_b))/2 = c*(1 - 1) + (1 + 1)/2 = 1
Extends from Modelica.Media.Interfaces.PartialPureSubstance.setSmoothState
(Return thermodynamic state so that it smoothly approximates: if x > 0 then state_a else state_b).
Type | Name | Description |
---|---|---|
Real | x | m_flow or dp |
ThermodynamicState | state_a | Thermodynamic state if x > 0 |
ThermodynamicState | state_b | Thermodynamic state if x < 0 |
Real | x_small | Smooth transition in the region -x_small < x < x_small |
Type | Name | Description |
---|---|---|
ThermodynamicState | state | Smooth thermodynamic state for all x (continuous and differentiable) |
This icon indicates Modelica functions.
Extends from Modelica.Icons.Function
(Icon for functions).
Type | Name | Description |
---|---|---|
ThermodynamicState | state | Thermodynamic state record |
Type | Name | Description |
---|---|---|
DynamicViscosity | eta | Dynamic viscosity |
This icon indicates Modelica functions.
Extends from Modelica.Icons.Function
(Icon for functions).
Type | Name | Description |
---|---|---|
ThermodynamicState | state | Thermodynamic state record |
Type | Name | Description |
---|---|---|
ThermalConductivity | lambda | Thermal conductivity |
This icon indicates Modelica functions.
Extends from Modelica.Icons.Function
(Icon for functions).
Type | Name | Description |
---|---|---|
ThermodynamicState | state | Thermodynamic state record |
Type | Name | Description |
---|---|---|
PrandtlNumber | Pr | Prandtl number |
This icon indicates Modelica functions.
Extends from Modelica.Media.Interfaces.PartialPureSubstance.pressure
(Return pressure).
Type | Name | Description |
---|---|---|
ThermodynamicState | state | Thermodynamic state record |
Type | Name | Description |
---|---|---|
AbsolutePressure | p | Pressure |
This icon indicates Modelica functions.
Extends from Modelica.Media.Interfaces.PartialPureSubstance.temperature
(Return temperature).
Type | Name | Description |
---|---|---|
ThermodynamicState | state | Thermodynamic state record |
Type | Name | Description |
---|---|---|
Temperature | T | Temperature |
This icon indicates Modelica functions.
Extends from Modelica.Media.Interfaces.PartialPureSubstance.density
(Return density).
Type | Name | Description |
---|---|---|
ThermodynamicState | state | Thermodynamic state record |
Type | Name | Description |
---|---|---|
Density | d | Density |
This icon indicates Modelica functions.
Extends from Modelica.Media.Interfaces.PartialPureSubstance.specificEnthalpy
(Return specific enthalpy).
Type | Name | Description |
---|---|---|
ThermodynamicState | state | Thermodynamic state record |
Type | Name | Description |
---|---|---|
SpecificEnthalpy | h | Specific enthalpy |
This icon indicates Modelica functions.
Extends from Modelica.Media.Interfaces.PartialPureSubstance.specificInternalEnergy
(Return specific internal energy).
Type | Name | Description |
---|---|---|
ThermodynamicState | state | Thermodynamic state record |
Type | Name | Description |
---|---|---|
SpecificEnergy | u | Specific internal energy |
This icon indicates Modelica functions.
Extends from Modelica.Media.Interfaces.PartialPureSubstance.specificEntropy
(Return specific entropy).
Type | Name | Description |
---|---|---|
ThermodynamicState | state | Thermodynamic state record |
Type | Name | Description |
---|---|---|
SpecificEntropy | s | Specific entropy |
This icon indicates Modelica functions.
Extends from Modelica.Media.Interfaces.PartialPureSubstance.specificGibbsEnergy
(Return specific Gibbs energy) and Modelica.Icons.Function
(Icon for functions).
Type | Name | Description |
---|---|---|
ThermodynamicState | state | Thermodynamic state record |
Type | Name | Description |
---|---|---|
SpecificEnergy | g | Specific Gibbs energy |
This icon indicates Modelica functions.
Extends from Modelica.Media.Interfaces.PartialPureSubstance.specificHelmholtzEnergy
(Return specific Helmholtz energy) and Modelica.Icons.Function
(Icon for functions).
Type | Name | Description |
---|---|---|
ThermodynamicState | state | Thermodynamic state record |
Type | Name | Description |
---|---|---|
SpecificEnergy | f | Specific Helmholtz energy |
This icon indicates Modelica functions.
Extends from Modelica.Media.Interfaces.PartialPureSubstance.specificHeatCapacityCp
(Return specific heat capacity at constant pressure).
Type | Name | Description |
---|---|---|
ThermodynamicState | state | Thermodynamic state record |
Type | Name | Description |
---|---|---|
SpecificHeatCapacity | cp | Specific heat capacity at constant pressure |
This icon indicates Modelica functions.
Extends from Modelica.Media.Interfaces.PartialLinearFluid.specificHeatCapacityCp
(Return specific heat capacity at constant volume).
Type | Name | Description |
---|---|---|
ThermodynamicState | state | Thermodynamic state record |
Type | Name | Description |
---|---|---|
SpecificHeatCapacity | cp | Specific heat capacity at constant pressure |
This icon indicates Modelica functions.
Extends from Modelica.Media.Interfaces.PartialPureSubstance.specificHeatCapacityCv
(Return specific heat capacity at constant volume).
Type | Name | Description |
---|---|---|
ThermodynamicState | state | Thermodynamic state record |
Type | Name | Description |
---|---|---|
SpecificHeatCapacity | cv | Specific heat capacity at constant volume |
This icon indicates Modelica functions.
Extends from Modelica.Media.Interfaces.PartialLinearFluid.specificHeatCapacityCv
(Return specific heat capacity at constant volume from the thermodynamic state).
Type | Name | Description |
---|---|---|
ThermodynamicState | state | Thermodynamic state record |
Type | Name | Description |
---|---|---|
SpecificHeatCapacity | cv | Specific heat capacity at constant volume |
This icon indicates Modelica functions.
Extends from Modelica.Media.Interfaces.PartialPureSubstance.isentropicExponent
(Return isentropic exponent) and Modelica.Icons.Function
(Icon for functions).
Type | Name | Description |
---|---|---|
ThermodynamicState | state | Thermodynamic state record |
Type | Name | Description |
---|---|---|
IsentropicExponent | gamma | Isentropic exponent |
A minor approximation is used: the reference density is used instead of the real one, which would require a numeric solution.
Extends from Modelica.Media.Interfaces.PartialPureSubstance.isentropicEnthalpy
(Return isentropic enthalpy).
Type | Name | Description |
---|---|---|
AbsolutePressure | p_downstream | Downstream pressure |
ThermodynamicState | refState | Reference state for entropy |
Type | Name | Description |
---|---|---|
SpecificEnthalpy | h_is | Isentropic enthalpy |
This icon indicates Modelica functions.
Extends from Modelica.Media.Interfaces.PartialPureSubstance.velocityOfSound
(Return velocity of sound) and Modelica.Icons.Function
(Icon for functions).
Type | Name | Description |
---|---|---|
ThermodynamicState | state | Thermodynamic state record |
Type | Name | Description |
---|---|---|
VelocityOfSound | a | Velocity of sound |
beta is defined as 1/v * der(v,T), with v = 1/d, at constant pressure p.
Extends from Modelica.Media.Interfaces.PartialPureSubstance.isobaricExpansionCoefficient
(Return overall the isobaric expansion coefficient beta).
Type | Name | Description |
---|---|---|
ThermodynamicState | state | Thermodynamic state record |
Type | Name | Description |
---|---|---|
IsobaricExpansionCoefficient | beta | Isobaric expansion coefficient |
beta is defined as 1/v * der(v,T), with v = 1/d, at constant pressure p.
Extends from Modelica.Media.Interfaces.PartialLinearFluid.isobaricExpansionCoefficient
(Return the isobaric expansion coefficient).
Type | Name | Description |
---|---|---|
ThermodynamicState | state | Thermodynamic state record |
Type | Name | Description |
---|---|---|
IsobaricExpansionCoefficient | beta | Isobaric expansion coefficient |
kappa is defined as - 1/v * der(v,p), with v = 1/d at constant temperature T.
Extends from Modelica.Media.Interfaces.PartialPureSubstance.isothermalCompressibility
(Return overall the isothermal compressibility factor).
Type | Name | Description |
---|---|---|
ThermodynamicState | state | Thermodynamic state record |
Type | Name | Description |
---|---|---|
IsothermalCompressibility | kappa | Isothermal compressibility |
kappa is defined as - 1/v * der(v,p), with v = 1/d at constant temperature T.
Extends from Modelica.Media.Interfaces.PartialLinearFluid.isothermalCompressibility
(Return the isothermal compressibility kappa).
Type | Name | Description |
---|---|---|
ThermodynamicState | state | Thermodynamic state record |
Type | Name | Description |
---|---|---|
IsothermalCompressibility | kappa | Isothermal compressibility |
This icon indicates Modelica functions.
Extends from Modelica.Media.Interfaces.PartialPureSubstance.density_derp_h
(Return density derivative w.r.t. pressure at const specific enthalpy).
Type | Name | Description |
---|---|---|
ThermodynamicState | state | Thermodynamic state record |
Type | Name | Description |
---|---|---|
DerDensityByPressure | ddph | Density derivative w.r.t. pressure |
This icon indicates Modelica functions.
Extends from Modelica.Media.Interfaces.PartialPureSubstance.density_derh_p
(Return density derivative w.r.t. specific enthalpy at constant pressure).
Type | Name | Description |
---|---|---|
ThermodynamicState | state | Thermodynamic state record |
Type | Name | Description |
---|---|---|
DerDensityByEnthalpy | ddhp | Density derivative w.r.t. specific enthalpy |
This icon indicates Modelica functions.
Extends from Modelica.Media.Interfaces.PartialPureSubstance.density_derp_T
(Return density derivative w.r.t. pressure at const temperature).
Type | Name | Description |
---|---|---|
ThermodynamicState | state | Thermodynamic state record |
Type | Name | Description |
---|---|---|
DerDensityByPressure | ddpT | Density derivative w.r.t. pressure |
This icon indicates Modelica functions.
Extends from Modelica.Media.Interfaces.PartialPureSubstance.density_derT_p
(Return density derivative w.r.t. temperature at constant pressure).
Type | Name | Description |
---|---|---|
ThermodynamicState | state | Thermodynamic state record |
Type | Name | Description |
---|---|---|
DerDensityByTemperature | ddTp | Density derivative w.r.t. temperature |
This icon indicates Modelica functions.
Extends from Modelica.Media.Interfaces.PartialPureSubstance.density_derX
(Return density derivative w.r.t. mass fraction).
Type | Name | Description |
---|---|---|
ThermodynamicState | state | Thermodynamic state record |
Type | Name | Description |
---|---|---|
Density | dddX[nX] | Derivative of density w.r.t. mass fraction |
This icon indicates Modelica functions.
Extends from Modelica.Media.Interfaces.PartialPureSubstance.molarMass
(Return the molar mass of the medium).
Type | Name | Description |
---|---|---|
ThermodynamicState | state | Thermodynamic state record |
Type | Name | Description |
---|---|---|
MolarMass | MM | Mixture molar mass |
This icon indicates Modelica functions.
Extends from Modelica.Icons.Function
(Icon for functions).
Type | Name | Description |
---|---|---|
AbsolutePressure | p | Pressure |
Temperature | T | Temperature |
MassFraction | X[:] | Mass fractions |
Type | Name | Description |
---|---|---|
SpecificEnthalpy | h | Specific enthalpy |
This icon indicates Modelica functions.
Extends from Modelica.Icons.Function
(Icon for functions).
Type | Name | Description |
---|---|---|
AbsolutePressure | p | Pressure |
Temperature | T | Temperature |
MassFraction | X[:] | Mass fractions |
Type | Name | Description |
---|---|---|
SpecificEntropy | s | Specific entropy |
This icon indicates Modelica functions.
Extends from Modelica.Icons.Function
(Icon for functions).
Type | Name | Description |
---|---|---|
AbsolutePressure | p | Pressure |
Temperature | T | Temperature |
MassFraction | X[:] | Mass fractions |
Type | Name | Description |
---|---|---|
Density | d | Density |
This icon indicates Modelica functions.
Extends from Modelica.Icons.Function
(Icon for functions).
Type | Name | Description |
---|---|---|
AbsolutePressure | p | Pressure |
SpecificEnthalpy | h | Specific enthalpy |
MassFraction | X[:] | Mass fractions |
Type | Name | Description |
---|---|---|
Temperature | T | Temperature |
This icon indicates Modelica functions.
Extends from Modelica.Icons.Function
(Icon for functions).
Type | Name | Description |
---|---|---|
AbsolutePressure | p | Pressure |
SpecificEnthalpy | h | Specific enthalpy |
MassFraction | X[:] | Mass fractions |
Type | Name | Description |
---|---|---|
Density | d | Density |
This icon indicates Modelica functions.
Extends from Modelica.Icons.Function
(Icon for functions).
Type | Name | Description |
---|---|---|
AbsolutePressure | p | Pressure |
SpecificEntropy | s | Specific entropy |
MassFraction | X[:] | Mass fractions |
Type | Name | Description |
---|---|---|
Temperature | T | Temperature |
This icon indicates Modelica functions.
Extends from Modelica.Icons.Function
(Icon for functions).
Type | Name | Description |
---|---|---|
AbsolutePressure | p | Pressure |
SpecificEntropy | s | Specific entropy |
MassFraction | X[:] | Mass fractions |
Type | Name | Description |
---|---|---|
Density | d | Density |
This icon indicates Modelica functions.
Extends from Modelica.Icons.Function
(Icon for functions).
Type | Name | Description |
---|---|---|
AbsolutePressure | p | Pressure |
SpecificEntropy | s | Specific entropy |
MassFraction | X[:] | Mass fractions |
Type | Name | Description |
---|---|---|
SpecificEnthalpy | h | Specific enthalpy |
Extends from Modelica.SIunits.MassFlowRate
.
Name | Value |
---|---|
quantity | "MassFlowRate." + mediumName |
unit | "kg/s" |
min | -100000 |
max | 100000 |
start | 0. |
This icon indicates Modelica functions.
Extends from Modelica.Icons.Function
(Icon for functions).
Type | Name | Description |
---|---|---|
AbsolutePressure | p | Pressure |
Temperature | T | Temperature |
Type | Name | Description |
---|---|---|
ThermodynamicState | state | Thermodynamic state record |
This icon indicates Modelica functions.
Extends from Modelica.Icons.Function
(Icon for functions).
Type | Name | Description |
---|---|---|
AbsolutePressure | p | Pressure |
SpecificEnthalpy | h | Specific enthalpy |
Type | Name | Description |
---|---|---|
ThermodynamicState | state | Thermodynamic state record |
This icon indicates Modelica functions.
Extends from Modelica.Icons.Function
(Icon for functions).
Type | Name | Description |
---|---|---|
AbsolutePressure | p | Pressure |
SpecificEntropy | s | Specific entropy |
Type | Name | Description |
---|---|---|
ThermodynamicState | state | Thermodynamic state record |
This icon indicates Modelica functions.
Extends from Modelica.Icons.Function
(Icon for functions).
Type | Name | Description |
---|---|---|
Density | d | Density |
Temperature | T | Temperature |
Type | Name | Description |
---|---|---|
ThermodynamicState | state | Thermodynamic state record |
This icon indicates Modelica functions.
Extends from Modelica.Icons.Function
(Icon for functions).
Type | Name | Description |
---|---|---|
AbsolutePressure | p | Pressure |
SpecificEnthalpy | h | Specific enthalpy |
Type | Name | Description |
---|---|---|
Density | d | Density |
This icon indicates Modelica functions.
Extends from Modelica.Icons.Function
(Icon for functions).
Type | Name | Description |
---|---|---|
AbsolutePressure | p | Pressure |
SpecificEnthalpy | h | Specific enthalpy |
Type | Name | Description |
---|---|---|
Temperature | T | Temperature |
This icon indicates Modelica functions.
Extends from Modelica.Icons.Function
(Icon for functions).
Type | Name | Description |
---|---|---|
Density | d | Density |
Temperature | T | Temperature |
Type | Name | Description |
---|---|---|
AbsolutePressure | p | Pressure |
This icon indicates Modelica functions.
Extends from Modelica.Icons.Function
(Icon for functions).
Type | Name | Description |
---|---|---|
Density | d | Density |
Temperature | T | Temperature |
Type | Name | Description |
---|---|---|
SpecificEnthalpy | h | Specific enthalpy |
This icon indicates Modelica functions.
Extends from Modelica.Icons.Function
(Icon for functions).
Type | Name | Description |
---|---|---|
AbsolutePressure | p | Pressure |
SpecificEntropy | s | Specific entropy |
Type | Name | Description |
---|---|---|
SpecificEnthalpy | h | Specific enthalpy |
This icon indicates Modelica functions.
Extends from Modelica.Icons.Function
(Icon for functions).
Type | Name | Description |
---|---|---|
AbsolutePressure | p | Pressure |
SpecificEntropy | s | Specific entropy |
Type | Name | Description |
---|---|---|
Temperature | T | Temperature |
This icon indicates Modelica functions.
Extends from Modelica.Icons.Function
(Icon for functions).
Type | Name | Description |
---|---|---|
AbsolutePressure | p | Pressure |
SpecificEntropy | s | Specific entropy |
Type | Name | Description |
---|---|---|
Density | d | Density |
This icon indicates Modelica functions.
Extends from Modelica.Icons.Function
(Icon for functions).
Type | Name | Description |
---|---|---|
AbsolutePressure | p | Pressure |
Temperature | T | Temperature |
Type | Name | Description |
---|---|---|
SpecificEnthalpy | h | Specific enthalpy |
This icon indicates Modelica functions.
Extends from Modelica.Icons.Function
(Icon for functions).
Type | Name | Description |
---|---|---|
AbsolutePressure | p | Pressure |
Temperature | T | Temperature |
Type | Name | Description |
---|---|---|
Density | d | Density |
This icon indicates Modelica functions.
Extends from Modelica.Icons.Function
(Icon for functions).
Type | Name | Description |
---|---|---|
SpecificEnthalpy | h | Specific enthalpy |
AbsolutePressure | p | Pressure |
Type | Name | Description |
---|---|---|
Temperature | T | Temperature |
This icon indicates Modelica functions.
Extends from Modelica.Icons.Function
(Icon for functions).
Type | Name | Description |
---|---|---|
AbsolutePressure | p | Pressure |
SpecificEntropy | s | Specific entropy |
Type | Name | Description |
---|---|---|
Temperature | T | Temperature |
Generated 2018-12-12 12:13:44 EST by MapleSim.