SchmittTriggerSchmitt trigger with hysteresis |
 |
Diagram
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This is a (non-inverting) Schmitt trigger. Resistance R1 can be chosen, resistance R2 is defined by the desired hysteresis. The output gets Vp for input voltage > vHys and Vn for input voltage < vHys*Vns/Vps.
The example is taken from: U. Tietze and C. Schenk, Halbleiter-Schaltungstechnik (German), 11th edition, Springer 1999, Chapter 6.5.2
Parameters (8)
| Vps |
Value: +15 Type: Voltage (V) Description: Positive supply |
|---|---|
| Vns |
Value: -15 Type: Voltage (V) Description: Negative supply |
| Vin |
Value: 5 Type: Voltage (V) Description: Amplitude of input voltage |
| f |
Value: 10 Type: Frequency (Hz) Description: Frequency of input voltage |
| vHys |
Value: 1 Type: Voltage (V) Description: (positive) hysteresis voltage |
| k |
Value: vHys / Vps Type: Real Description: Auxiliary calculated parameter to be used in R2 calculation |
| R1 |
Value: 1000 Type: Resistance (Ω) Description: Arbitrary resistance |
| R2 |
Value: R1 / k Type: Resistance (Ω) Description: Calculated resistance to reach hysteresis voltage |
Components (6)
 |
opAmp |
Type: IdealizedOpAmpLimted |
|---|---|---|
 |
ground |
Type: Ground |
 |
vIn |
Type: TrapezoidVoltage |
 |
vOut |
Type: VoltageSensor |
 |
r1 |
Type: Resistor |
|
r2 |
Type: Resistor |