ExamplesExamples that demonstrate the usage of the Analog electrical components |
 |
Package Contents
 |
Cauer low pass filter with analog components |
 |
Cauer low pass filter with operational amplifiers |
 |
Cauer low-pass filter with operational amplifiers and switched capacitors |
 |
Characteristic of ideal diodes |
 |
Characteristic of ideal thyristors |
 |
Chua's circuit, ns, V, A |
 |
Simple NPN transistor amplifier circuit |
 |
Heating MOS Inverter |
 |
Heating NPN Or Gate |
 |
Heating PNP NOR Gate |
 |
Heating resistor |
 |
Heating rectifier |
 |
CMOS NAND Gate (see Tietze/Schenk, page 157) |
 |
Example for Zener diodes |
 |
B6 diode bridge |
 |
Simple demo to show behaviour of SaturatingInductor component |
 |
Simple demo of a VariableResistor model |
 |
Comparison of switch models both with and without arc |
 |
Thyristor demonstration example |
 |
Simple Amplifier circuit which uses OpAmpDetailed |
 |
Transformer circuit to show the magnetization facilities |
 |
Comparison of controlled switch models both with and without arc |
 |
Simple triac test circuit |
 |
Ideal triac test circuit |
 |
Conversion circuit |
 |
Example to demonstrate variants to generate FMUs (Functional Mock-up Units) |
 |
Resonance circuits: example to demonstrate generation of FMUs (Functional Mock-up Units) |
 |
Inverting amplifier |
 |
Examples with operational amplifiers |
 |
Utility components used by package Examples |
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This package contains examples that demonstrate the usage of the components of the Electrical.Analog library.
The examples are simple to understand. They will show a typical behavior of the components, and they will give hints to users.