SignalGeneratorRectangle-Triangle generator |
 |
Diagram
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This signal generator consists of a Schmitt trigger and an integrator. The output of the Schmitt trigger part opamp (opAmp1) is a rectangular signal with the amplitude VAmp and the frequency f. The output of the integrator part opamp (opAmp2) is a triangular signal of also the amplitude Vamp and the frequency f.
Source:
U. Tietze and C. Schenk, Halbleiter-Schaltungstechnik (German), 11th edition, Springer 1999, Chapter 14.5.2
Parameters (8)
| Vps |
Value: +15 Type: Voltage (V) Description: Positive supply |
|---|---|
| Vns |
Value: -Vps Type: Voltage (V) Description: Negative supply |
| VAmp |
Value: 10 Type: Voltage (V) Description: Desired amplitude of output |
| R1 |
Value: 1000 Type: Resistance (Ω) Description: Arbitrary resistance for Schmitt trigger part |
| R2 |
Value: R1 * Vps / VAmp Type: Resistance (Ω) Description: Calculated resistance for Schmitt trigger to reach VAmp |
| f |
Value: 10 Type: Frequency (Hz) Description: Desired frequency |
| R |
Value: 1000 Type: Resistance (Ω) Description: Arbitrary resistance of integrator part |
| C |
Value: Vps / VAmp / (4 * f * R) Type: Capacitance (F) Description: Calculated capacitance of integrator part to reach f |
Components (9)
 |
opAmp1 |
Type: IdealizedOpAmpLimted |
|---|---|---|
 |
r2 |
Type: Resistor |
|
r1 |
Type: Resistor |
 |
ground |
Type: Ground |
|
opAmp2 |
Type: IdealizedOpAmpLimted |
 |
c |
Type: Capacitor |
|
r |
Type: Resistor |
 |
vOutRectangle |
Type: VoltageSensor |
|
vOutTriangle |
Type: VoltageSensor |