SineCurrentSine current source |
 |
Diagram
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This current source uses the corresponding signal source of the Modelica.Blocks.Sources package. Care for the meaning of the parameters in the Blocks package. Furthermore, an offset parameter is introduced, which is added to the value calculated by the blocks source. The startTime parameter allows to shift the blocks source behavior on the time axis.
Parameters (5)
| offset |
Value: 0 Type: Current (A) Description: Current offset |
|---|---|
| startTime |
Value: 0 Type: Time (s) Description: Time offset |
| I |
Value: Type: Current (A) Description: Amplitude of sine wave |
| phase |
Value: 0 Type: Angle (rad) Description: Phase of sine wave |
| freqHz |
Value: Type: Frequency (Hz) Description: Frequency of sine wave |
Connectors (2)
 |
p |
Type: PositivePin Description: Positive electrical pin |
|---|---|---|
 |
n |
Type: NegativePin Description: Negative electrical pin |
Components (1)
 |
signalSource |
Type: Sine |
|---|
Used in Examples (1)
 |
Modelica.Electrical.Analog.Examples Resonance circuits: example to demonstrate generation of FMUs (Functional Mock-up Units) |
Used in Components (1)
 |
Modelica.Electrical.MultiPhase.Sources Multiphase sine current source |