This information is part of the Modelica Standard Library maintained by the Modelica Association.

This is a model of a complete inverter drive comprising:

• a grid model and a line choke
• a diode rectifier
• a buffer capacitor
• a switching inverter
• a pulse width modulation
• a voltage/frequency characteristic
• the reference frequency ramped up
• an induction machine with squirrel cage
• a load inertia and quadratic speed dependent load torque (like a fan or pump)

Please note: Be patient, two switching devices cause many event iteratons which cost performance.

Note that due to the voltage drop the voltage at the machine can't reach the full voltage which means torque reduction.

Default machine parameters are adapted to nominal phase voltage 400 V and nominal phase current 25 A.

VNominal	Value: 400 Type: Voltage (V) Description: Nominal RMS voltage per phase
fNominal	Value: 50 Type: Frequency (Hz) Description: Nominal frequency
RGrid	Value: 10e-3 Type: Resistance (Ω) Description: Grid choke resistance
LGrid	Value: 500e-6 Type: Inductance (H) Description: Grid choke inductance
VDC	Value: factorY2DC(m) * VNominal / sqrt(3) Type: Voltage (V) Description: Theoretical DC voltage
CDC	Value: 5e-3 Type: Capacitance (F) Description: DC capacitor
TLoad	Value: 161.4 Type: Torque (N·m) Description: Nominal load torque
wLoad	Value: 1440.45 * 2 * pi / 60 Type: AngularVelocity (rad/s) Description: Nominal load speed
JLoad	Value: 0.29 Type: Inertia (kg·m²) Description: Load's moment of inertia
aimcData	Value: Type: AIM_SquirrelCageData