AIMC_TransformerTest example: AsynchronousInductionMachineSquirrelCage transformer starting |
 |
Diagram
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
Test example: Asynchronous induction machine with squirrel cage - transformer startingAt start time tStart1 three phase voltage is supplied to the asynchronous induction machine with squirrel cage via the transformer; the machine starts from standstill, accelerating inertias against load torque quadratic dependent on speed; at start time tStart2 the machine is fed directly from the voltage source, finally reaching nominal speed.
Simulate for 2.5 seconds and plot (versus time):
- currentQuasiRMSSensor.I: stator current RMS
- aimc.wMechanical: motor's speed
- aimc.tauElectrical: motor's torque
Parameters (9)
| VNominal |
Value: 100 Type: Voltage (V) Description: Nominal RMS voltage per phase |
|---|---|
| fNominal |
Value: 50 Type: Frequency (Hz) Description: Nominal frequency |
| tStart1 |
Value: 0.1 Type: Time (s) Description: Start time |
| tStart2 |
Value: 2.0 Type: Time (s) Description: Start time of bypass transformer |
| TLoad |
Value: 161.4 Type: Torque (N·m) Description: Nominal load torque |
| wLoad |
Value: 1440.45 * 2 * Modelica.Constants.pi / 60 Type: AngularVelocity (rad/s) Description: Nominal load speed |
| JLoad |
Value: 0.29 Type: Inertia (kg·m²) Description: Load's moment of inertia |
| transformerData |
Value: Type: TransformerData |
| aimcData |
Value: Type: AIM_SquirrelCageData |
Components (16)
 |
aimc |
Type: AIM_SquirrelCage |
|---|---|---|
 |
currentQuasiRMSSensor |
Type: CurrentQuasiRMSSensor |
 |
sineVoltage |
Type: SineVoltage |
 |
star |
Type: Star |
 |
ground |
Type: Ground |
 |
booleanStep1 |
Type: BooleanStep[m] |
 |
idealCloser |
Type: IdealClosingSwitch |
 |
transformer |
Type: Yy00 |
|
ground2 |
Type: Ground |
 |
transformerData |
Type: TransformerData |
|
booleanStep2 |
Type: BooleanStep[m] |
 |
idealCommutingSwitch |
Type: IdealCommutingSwitch |
 |
loadInertia |
Type: Inertia |
 |
quadraticLoadTorque | |
 |
terminalBox |
Type: TerminalBox |
 |
aimcData |
Type: AIM_SquirrelCageData |