ThyristorCenterTap2Pulse_RTwo pulse thyristor rectifier with center tap and resistive load |
 |
Diagram
Information
This information is part of the Modelica Standard Library maintained by the Modelica Association.
This example shows a controlled center tap two pulse rectifier with resistive load.
Plot current currentSensor.i, average current meanCurrent.y, voltage voltageSensor.v and average voltage meanVoltage.v.
Parameters (4)
| Vrms |
Value: 110 Type: Voltage (V) Description: RMS supply voltage |
|---|---|
| f |
Value: 50 Type: Frequency (Hz) Description: Frequency |
| constantFiringAngle |
Value: 30 * pi / 180 Type: Angle (rad) Description: Firing angle |
| R |
Value: 20 Type: Resistance (Ω) Description: Load resistance |
Components (11)
 |
ground |
Type: Ground |
|---|---|---|
 |
sinevoltage_n |
Type: SineVoltage |
|
sinevoltage_p |
Type: SineVoltage |
 |
rectifier |
Type: ThyristorCenterTap2Pulse |
 |
voltagesensor |
Type: VoltageSensor |
 |
meanVoltage |
Type: Mean |
 |
rootMeanSquareVoltage |
Type: RootMeanSquare |
 |
currentSensor |
Type: CurrentSensor |
|
meanCurrent |
Type: Mean |
 |
pulse2 |
Type: VoltageBridge2Pulse |
 |
resistor |
Type: Resistor |